T-1-3/4 Double Height, Right-Angle LED Assembly Interlocking G73XB Series 6.2 7.6 1 4.7 Anode Typical hole pattern on a nominal pitch of 6.2 mm. 3.2±.5 2.5 3.5 min G732B 2.54 12.7 2.54 2.54 5.2 11±.3 0.5 1t G733B 2t 3t ... Nt ... Nb G73NB G734B 1b + - + - TopLED 2b 3b Grn + Red or Yel + Grn + Red or Yel + BottomLED Single Color Bi-color Specify part desired as follows: G73NB/Order Code 1t + Order Code 2t + ... + Order Code Nt + Order Code 1b + Order Code 2b+ ... + Order Code Nb For example: “G732B/2I+2G” designates an assembly with 2 red LEDs on the two top positions and 2 green LEDs on the two bottom positions. Recommend that N<= 8 for handling ease. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Epoxy & Type Color Order Code Red H 697 2.1 2.0 36 5-10 TInted Diffused Resistor Required Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 Tinted Diffused 5V Operation Not available in this series. Tinted Diffused 12V Operation White Diffused Bipolar, Bicolor Hi Eff Red/Grn EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-38