T-1, (3-mm) Round, PCB Mount Right Angle Indicator, G61B Series www.ledidea.com The G61B is a T-1 size right-angle indicator suitable as logic status, position, or fault indication. The G61B has the lamp located at 5.08mm(0.2") above the PCB, which matches the G61XB and the G95XB series in height. For easier handling in multiple applications, refer to the G61XB specifications. The G61B series can be supplied with pinout reversed from that shown by adding “-RL” to the order code. 2.5±.5 4.6 6.35 3Ø 7.4 5.08 + – 5.08 ref 2.54 Red or yellow Anode Green Anode + – (typ for single color) (typ for bi-color) Specify part desired as follows: G61B/Order Code For example: “G61B/G” designates an assembly with a standard diffused green LED. “G61B/G-RL” designates the same assembly with pins reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Typical Characteristics Color Order Code λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Hi Eff Red I 635 2.0 10 60 10-20 10-20 Peak Vf (V) Iv (mcd) 2Θ1/2 Green G 565 2.1 10 60 Yellow Y 585 2.0 10 60 10-20 Orange O 610 2.0 10 60 10-20 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 Yellow YT 585 2.0 40 40 10-20 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 2-10 Hi Eff Red I5 635 - 10 60 5V Green G5 565 - 10 60 5V Yellow Y5 585 - 10 60 5V 10-20 Red/Green EG 635/565 2.0/2.1 4/4 90 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G