T-1 (3 mm) Round, Single- and Bi-color PCB Mount Right Angle LED Indicator, G96XB Series The G96B right angle indicator is primarily designed to use the three-leaded bi-color LED lamp which has pins spaced on 2.54 mm centers in a single row. It has a wide stance and its length permits the front of the holder to protrude further from the edge of the PCB. In addition to those LEDs listed, any of IDEA's 2151 series of T-1 lamps can be used in this indicator. Standard 3-leaded bi-color lamps are common cathode. 2.5 6.9 8.5 3 5.08 1 2 1 2 3 10.8 2.54 typ 2.54 G962B Single-color 12.2 G963B Bi-color Connections LED Type Tri-color—EG (Both chips on for amber) Bi-color—YG Single color—All listed Pin 1 Pin 2 Pin 3 Red+ Common– Grn+ Yel+ Common– Grn+ Anode Cathode Specify part desired as follows: (X = 2 for single color, tinted 2-leaded LEDs. X = 3 for 3-leaded G96XB/Order Code For example: “G963B/EG” designates an assembly with a red/green LED. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Typical Characteristics Color Order Code Red H Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) 697 2.1 1.6 40 5-10 Hi Eff Red I 635 2.0 4.5 40 10-20 Green G 565 2.1 4.5 40 10-20 Yellow Y 585 2.0 4.5 40 10-20 Orange O 610 2.0 4.5 40 10-20 Hi Eff Red IT 635 2.0 11 20 10-20 Green GT 565 2.1 15 20 10-20 Yellow YT 585 2.0 10 20 10-20 Red H2 697 2.0 1.2 @ 2mA 40 2-10 Tinted Diffused For 2mA Operation Hi Eff Red I2 635 2.1 1.4 @ 2mA 40 2-10 Green G2 565 2.0 1.2 @ 2mA 40 2-10 Yellow Y2 585 2.0 1.2 @ 2mA 40 2-10 White Diffused Bipolar, Bicolor Red/Green EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-24