2 x 5 mm Rectangular, Single- or Bi-Color PCB Mount Right Angle LED Array, G98XB Series The G98XB right angle indicator is primarily designed to use the three-leaded bi-color LED lamp which has pins spaced on 2.54 mm centers in a single row. It has a wide stance and its length permits the front of the holder to protrude further from the edge of the PCB. Standard 3-leaded bi-color lamps are common cathode. 4 6.9 5 2 8.5 5.08 1 2 1 2 3 10.8 2.54 typ 2.54 G982B 2-leaded, single color 12.2 G983B 3-leaded, bi-color only LED Type Pin 1 Red+ Yel+ Anode Tri-color-EG (Both chips on for amber) Bi-color- YG Single color-All listed Connections Pin 2 Common– Common– Cathode Pin 3 Grn+ Grn+ Specify part desired as follows: (X = 2 for single color, tinted 2-leaded LEDs. X = 3 for 3-leaded G98XB/Order Code For example: “G983B/EG” designates an assembly with an orange red/green LED. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type White Diffused Bipolar, Bicolor TInted Diffused Resistor Required Color Typical Characteristics Order Code Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) Hi Eff Red/Grn EG 635/565 2.1/2.0 15/10 124 10-20 Yellow/Green YG 585/565 2.1/2.0 10/10 124 10-20 Red H 697 2.1 2.3 124 5-10 Hi Eff Red I 635 2.0 13 124 10-20 Green G 565 2.1 8.5 124 10-20 Yellow Y 585 2.0 9.4 124 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-44