IRONWOOD CA-QFE52SA-M-Z-T-01

1.772"
0.100" typ.
1.339"
1.750"
1
2.775"
5
0.771"
0.24"
3
1
3
5
Substrate: 0.0625"±0.007" FR4/G10 or equivalent high
temp material. 1/2 oz. Cu clad. SnPb plating
Pins: shell material- Brass Alloy 360 1/2 hard; finish10µ" Au over 50µ" Ni (min.). Contact material- BeCu;
finish 10µ" Au over 100µ" Ni (min.)
Test points: material- Phosphor Bronze; plating- Sn
over 50µ" Ni. Gold flash on contact end.
Description: Carrier Adaptor
52 position (0.65mm pitch) QFP Zero Insertion Force socket with test points to 52 position surface mountable QFP
emulator foot.
All tolerances: ±0.005" (unless stated otherwise). Materials and specifications are subject to change without notice.
CA-QFE52SA-M-Z-T-01 Drawing
© 1996 IRONWOOD ELECTRONICS, INC.
PO BOX 21151 ST. PAUL, MN 55121
Tele: (651) 452-8100
www.ironwoodelectronics.com
Status: Released
Drawing: Vang Thao
Scale: 2:1
Rev: B
Date: 11/13/96
File: CA-QFE052SA-M-Z-T-01 Dwg Modified: 8/11/98

Open as PDF

Similar pages: IRONWOOD CA-PLCC028-Z-J-T-01; IRONWOOD CA-PLCC84-Z-M-T-01; IRONWOOD CA-PLCC84-Z-C-T-01; IRONWOOD CA-PLCC44-D-P-T-01; IRONWOOD CA-QFE44SH-L-Z-T-01; IRONWOOD CA-PLCC52-Z-M-T-01; IRONWOOD CA-QFE32SA-L-Z-T-02F; IRONWOOD CA-PLCC068-Z-J-T-01; IRONWOOD CA-QFE52SB-L-Z-T-01; IRONWOOD CA-QFE44SA-L-Z-T-01; IRONWOOD CA-QFE64RC-L-Z-T-01; IRONWOOD CA-QFE52SA-L-Z-01; IRONWOOD CA-QFE52SA-L-Z-T-01; IRONWOOD CA-PLCC20-Z-M-T-01; IRONWOOD CA-QFE44SE-M-Z-T-01; IRONWOOD CA-QFE44SB-L-Z-T-01; IRONWOOD CA-QFE44SE-L-Z-T-01; IRONWOOD CA-QFE52SF-M-Z-T-01; IRONWOOD CA-QFE52SF-L-Z-T-01; IRONWOOD CA-QFE64SD-L-N-T-01; IRONWOOD CA-QFE64SA-L-Z-T-01; IRONWOOD CA-QFE32SA-L-Z-T-02