Accessories & Service Programming accessories Programming accessories Dimensions Part number Terminal assignment Programming cable for parallel shaft encoders, CD with ProGeber software and manual Encoder function Mating connector Core M12, 5-pins colour PC connector D-SUB, 9-pins – Pin 1 brown – RxD Pin 2 white Pin 3 GND Pin 3 blue Pin 5 P/R Mode Pin 4 black Pin 5 TxD grey Pin 2 Pin 5 Jumper 4-6 and Jumper 7-8 Subject to modification in technic and design. Errors and omissions excepted. Connect encoder to voltage supply (UB/red/pin 36 and GND/blue/pin 37) using the supplementary 37-pin D-SUB connector. 1 www.baumerivo.com 30/10/2008 Z 139.005