Accessories & Service Programming accessories Programming accessories Dimensions Part number Terminal assignment Programming cable for parallel hollow shaft encoders, CD with ProGeber software and manual Encoder function D-SUB connector Core 37-pins colour PC connector D-SUB, 9-pins UB Pin 36 brown – RxD Pin 35 beige Pin 3 GND Pin 37 Pin 37 black blue – Pin 5 TxD Pin 34 green Pin 2 Jumper 4-6 and Jumper 7-8 Subject to modification in technic and design. Errors and omissions excepted. Connect encoder to supply voltage using the supplementary connections (UB/red and GND/blue). 1 www.baumerivo.com 30/10/2008 Z 139.006