JFW 50PA-411

JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50PA-411
LC HANDOVER TEST SYSTEM
Frequency Range
800-6000 MHz
Configuration
16 x 3 LC Handover Test System
(See block diagram 092-5270)
Impedance
50 Ohms nominal
Attenuation Range
0-63 dB in 1 dB steps
Attenuation Steps
1, 2, 4, 8, 16 and 32 dB
VSWR
1.75:1 maximum
1.5:1 typical
Attenuation Accuracy
(guaranteed monotonic)
1-14 dB
15-63 dB
Insertion Loss
ANT1-ANT8 to J1 and ANT9-ANT16 to J3:
34 dB maximum
27 dB typical @ 800 MHz
32 dB typical @ 6000 MHz
± 0.8 dB
± 1.0 dB or 4%
ANT1-ANT16 to J2:
38 dB maximum
31 dB typical @ 800 MHz
36 dB typical @ 6000 MHz
Power Divider Isolation
20 dB minimum
RF Input Power
+20 dBm average
Switching Speed
1 microsecond typical
(after command is received and processed)
(3 milliseconds typical processing time)
AC Supply
100-240 VAC @ 47-63 Hz
Manual Control
Keypad and LCD display
Remote Control
Ethernet (10/100) and RS-232
Baud Rates (RS-232 mode)
9600, 19200, or 38400 Baud
--CONTINUED-Page 1 of 2
JFW FORM E-7-F REV F
JFW Industries, Inc.
Phone: 317-887-1340
[email protected]
www.jfwindustries.com
SPECIFICATION SHEET
JFW MODEL 50PA-411
LC HANDOVER TEST SYSTEM
Remote Commands
Pause
Variable Handover
Feedback Handover
Fade Attenuator
Feedback Fade
Set Attenuator
Read Attenuator
Change Baud Rate
Identification
RF Connector
SMA or N female
Operating Temperature Range
0ºC to +50ºC
Physical Size
See outline drawing 092-5624
ECR/ECN #
Page 2 of 2
DATE
REV
APPR / DATE
15916
04/30/2008
05/28/2008
A
TRS 04/30/2008
TRS 05/28/2008
16179
08/07/2008
B
TRS 08/07/2008
ECR/ECN #
JFW FORM E-7-F REV F
DATE
(PAUSEx)
(VHND Av Aw Vx Vy Tz)
(FHND Av Aw Vx Vy Tz)
(FAx y z t)
(FFAx y z t)
(SAx y)
(RAx)
(CBx)
(IDN)
REV
APPR / DATE