JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PMA-033 TRANSCEIVER TEST SYSTEM Frequency Range 30-3000 MHz Configuration 9 Port Transceiver Test System (See block diagram 092-5356) Impedance 50 Ohms nominal Attenuation Range 0-95 dB in 1 dB steps VSWR 1.8:1 maximum Attenuation Accuracy ± 0.50 dB 1-7 dB ± 1.00 dB 8-11 dB ± 1.25 dB or 3% 12-95 dB (whichever is greater) (guaranteed monotonic) Insertion Loss 38 dB maximum Power Divider Isolation 24 dB minimum RF Input Power 1 Watt average Switching Speed 2 microseconds (after command is received & processed) (3 milliseconds typial processing time) AC Supply 100-240 VAC @ 47-63 Hz Remote Control RS-232 (9600, 19200, or 38400 Baud) Ethernet (TCP, 10/100, up to 4 users) Remote Commands Set Path, Read Path, Set Attenuator, Set Attenuator w/ Response, Set All Attenuators, Set Multiple Attenuators, Read Attenuator, Read All Attenuators, Fade Attenuator, Variable Handover, Pause, Store, Recall, Identification, Disconnect, Close, Change Baud Rate RF Connector SMA female Operating Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-6705 ECR/ECN # DATE REV 08/27/2010 Page 1 of 1 APPR / DATE ECR/ECN # TRS 08/27/2010 19864 03/18/2011 A TRS 03/18/2011 21986 10/09/2012 B TRS 10/09/2012 JFW FORM E-7-F REV F DATE REV APPR / DATE