JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PA-392 LC HANDOVER TEST SYSTEM Frequency Range 800-2200 MHz Configuration 6 x 1 LC Handover Test System (See block diagram 092-5640) Impedance 50 Ohms nominal VSWR 1.6:1 maximum Attenuation Range 0-127 dB in 1 dB steps Insertion Loss 15.9 dB nominal Attenuation Accuracy ± 0.4 dB or 2% of programmed (whichever is greater) Power Divider Isolation 25 dB minimum RF Input Power +20 dBm Switching Speed 5 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) AC Supply 100-240 VAC @ 47-63 Hz Manual Control Keypad and LCD display Remote Control Ethernet (10/100) and RS-232 Remote Commands Variable Handover Feedback Handover Fade Attenuator Feedback Fade Pause Set Attenuator Read Attenuator Change Baud Rate Identification Baud Rates (RS-232 mode) 9600, 19200, or 38400 Baud RF Connector N female Temperature Range 0ºC to +50ºC Physical Size See outline drawing 092-5641 --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F (VHND Av Aw Vx Vy Tz) (FHND Av Aw Vx Vy Tz) (FAx y z t <CR>) (FFAx y z t <CR>) (PAUSEx) (SAx y <CR>) (RAx <CR>) (CBx <CR>) (IDN <CR>) JFW Industries, Inc. Phone: 317-887-1340 [email protected] www.jfwindustries.com SPECIFICATION SHEET JFW MODEL 50PA-392 LC HANDOVER TEST SYSTEM ECR/ECN # Page 2 of 2 DATE REV APPR / DATE 15779 11/26/2007 04/30/2008 A TRS 11/26/2007 TRS 04/30/2008 15916 05/28/2008 B TRS 05/28/2008 ECR/ECN # 15970 16179 JFW FORM E-7-F REV F DATE 06/04/2008 08/07/2008 REV C D APPR / DATE TRS 06/04/2008 TRS 08/07/2008