HCP Series · Solid Aluminium Electrolytic Capacitor with Conductive Polymer · Ultra low ESR · High Ripple Current · Switchmode Power Supplies, Computer, DC/DC Converter · Noise Suppression in Smoothing / High-Frequency Circuits lower ESR CD 284 XY HPM Item Characteristics Operating Temperature Range (°C) -55 ~ +105 Voltage Range (V) 4 ~ 16 Capacitance Range (µF) 68 ~ 1 200 Capacitance Tolerance (20°C, 120Hz) ± 20% Surge Voltage Rated Voltage x 1,15 Leakage Current (µA) The initial specified value or less (20°C, 2min) Dissipation Factor (20°C, 120Hz) The initial specified value or less Equivalent Series Resistance (20°C, 100kHz) The initial specified value or less Z (+105°C) / Z (+20°C) ≥ 0,75 Stability at 100kHz Temperature Characteristics Z Z (-55°C) / Z (+20°C) ≤ 1,25 Stability at 100kHz 2 000h, Rated voltage applied at 105°C Capacitance change : within ± 20% of the initial measured value Dissipation Factor Tan δ : ≤150% of initial specified value ESR : ≤150% of initial specified value DC Leakage Current : ≤ the initial specified value 1 000h, Rated Voltage applied at 60°C, 90~95% RH Capacitance change : within ± 20% of the initial measured value Dissipation Factor Tan δ : ≤150% of initial specified value ESR : ≤150% of initial specified value DC Leakage Current : ≤ the initial specified value 1 000 cycles at 105°C, with UDC = 1,15 UR ( 30sec load / 330sec discharge) Capacitance change : within ± 20% of the initial measured value Dissipation Factor Tan δ : ≤150% of initial specified value ESR : ≤150% of initial specified value DC Leakage Current : ≤ the initial specified value Load Life Moisture Resistance Typical Curves Frequency characteristics of Impedance and ESR Frequency characteristics of Impedance and ESR 10 000 10 000 Z, ESR (mOhm) Z, ESR (mOhm) Surge Voltage Characteristics 1000 100 100 1 1 0.1 ESR 1 000 10 10 1 Z 10 100 HCP 470µF 6,3V 0.1 1 000 ESR Frequency (kHz) Capacity Drift: Polymer Capacitor versus Standard Electrolytic Capacitor 1 Z 10 100 HCP 820µF 4V 1 000 Frequency (kHz) ESR Drift: Polymer Capacitor versus Standard Electrolytic Capacitor 600µF ESR (Ohm) Capacity Polymer miniaturized HCP 500µF 400µF 300µF 70 60 50 40 30 20 200µF 10 100µF 0 0µF -10 -55°C -40°C -25°C 0°C HCP 10V 470µF Standard 25V 470µF 80 20°C 40°C 80°C 105°C Temperature - 55°C - 40°C -25°C 0°C HCP 10V 470µF Standard 25V 470µF 20°C 40°C 80°C 105°C Temperature Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 HCP Series Ratings for HCP Series VDC Code Rated Capacitance Max ESR 20°C, 100kHz Max Ripple Current 105°C, 100kHz (V) (µF) (mΩ) 510 16 560 620 6,3 0J 10 1A 16 1C Leakage Current Size Ø DxL (mArms) - (µA) (mm) 4 080 0,08 410 8 x 11,5 14 4 080 0,08 450 8 x 11,5 13 4 260 0,08 500 8 x 11,5 680 13 4 840 0,08 550 10 x 12,5 750 12 5 040 0,08 600 10 x 12,5 820 12 5 040 0,08 655 10 x 12,5 1 000 12 5 040 0,08 800 10 x 12,5 1 200 12 5 040 0,15 960 10 x 12,5 150 30 2 780 0,07 190 8 x 11,5 220 30 3 000 0,07 280 8 x 11,5 330 25 3 500 0,08 415 8 x 11,5 390 16 3 810 0,08 490 8 x 11,5 470 16 3 810 0,08 595 8 x 11,5 560 14 4 330 0,08 705 10 x 12,5 680 13 4 840 0,08 860 10 x 12,5 820 12 5 040 0,15 1 035 10 x 12,5 100 30 2 670 0,07 200 8 x 11,5 150 29 3 020 0,07 300 10 x 12,5 220 27 3 370 0,07 440 10 x 12,5 330 21 4 140 0,08 660 10 x 12,5 390 18 4 510 0,08 780 10 x 12,5 470 15 4 510 0,08 940 10 x 12,5 68 36 2 700 0,06 220 8 x 11,5 100 30 2 740 0,06 320 8 x 11,5 150 28 3 260 0,06 480 10 x 12,5 330 14 5 050 0,06 1 056 10 x 12,5 Polymer 4 0G Dissipation Factor 20°C, 120Hz Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 81 Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial = R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance 0,47 = R47 ±20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 CD VS = BS CD VH = VH 1,0 = 010 CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1 000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 ±10% =K +50 / -10% = T Taped = FF Terminal = T2 5x11,5 = 0511 6,3x11,5= 0611 CD 262 = QM 10 000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90° - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions Ø DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm Allowable Range of Peak Temperature Size T (°C) t (second) t 1 (second) Ø 4 ~ 6,3 Ø 8 x 10,5 Ø 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L L≤7 L ≥ 11 ØD 3 4 5 6,3 8 5 6,3 8 F 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 Ø d 0,4 aMax 0,45 0,5 10 12,5 16 5,0 0,6 1,0 18 7,5 0,8 20 22 10,0 25 12,5 1,0 2,0 in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range ØD Dimensions L (max) H ± 0,75 Ho ± 0,5 F ± 0,5 P ± 0,1 4~6 13 18,5 - 2,5 12,7 8 13 18,5 - 3,5 12,7 4~8 7 17,5 5 ~ 6,3 13 18,5 Ammopack Form Form A A Form B FF 16 B 12,7 8 22 20,0 5 10 22 18,5 A FD 12,5 27 18,5 - 15,0 12,5 27 18,5 - 25,4 Form C C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code CB CC CD CE CF I 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 preferred in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2