HPM Series · Miniaturized Solid Aluminium Electrolytic Capacitor with Conductive Polymer · Ultra ESR · High Ripple Current · Switchmode Power Supplies, Computer, DC/DC Converter · Noise Suppression in Smoothing / High-Frequency Circuits lower ESR CD 284 XY miniaturized HCP HPM Item Characteristics Operating Temperature Range (°C) -55 ~ +105 Voltage Range (V) 2,5 ~ 6,3 Capacitance Range (µF) 560 ~ 1 500 Capacitance Tolerance (20°C, 120Hz) ± 20% Surge Voltage Rated Voltage x 1,15 Leakage Current (µA) The initial specified value or less (20°C, 2min) Dissipation Factor (20°C, 120Hz) The initial specified value or less Equivalent Series Resistance (20°C, 100kHz) The initial specified value or less Z (+105°C) / Z (+20°C) ≥ 0,75 Stability at 100kHz Temperature Characteristics Z Z (-55°C) / Z (+20°C) ≤ 1,25 Stability at 100kHz 2 000h, Rated voltage applied at 105°C Capacitance change : within ± 20% of the initial measured value Dissipation Factor Tan δ: ≤150% of initial specified value ESR: ≤150% of initial specified value DC Leakage Current : ≤ the initial specified value 500h, Rated Voltage applied at 60°C, 90~95% RH Capacitance change : within ± 20% of the initial measured value Dissipation Factor Tan δ: ≤150% of initial specified value ESR: ≤150% of initial specified value DC Leakage Current : ≤ the initial specified value 1 000 cycles at 105°C, with UDC = 1,15 UR ( 30sec load / 330sec discharge) Capacitance change : within ± 20% of the initial measured value Dissipation Factor Tanδ: ≤150% of initial specified value ESR: ≤150% of initial specified value DC Leakage Current : ≤ the initial specified value Load Life Moisture Resistance Surge Voltage Characteristics Polymer Ratings for HPM Series VDC Code Rated Capacitance Max ESR 20°C, 100kHz Max Ripple Current 105°C, 100kHz (V) (µF) (mΩ) 560 7 820 Dissipation Factor 20°C, 120Hz Leakage Current Size Ø DxL (mArms) - (µA) (mm) 4 400 0,12 500 8x8 7 5 600 0,12 513 8x8 1 000 7 5 600 0,12 625 8x8 1500 7 5 600 0,12 750 8x8 4 0G 560 7 5 600 0,12 560 8x8 820 7 5 600 0,12 820 8x8 6,3 0J 680 7 5 600 0,12 857 8x8 2,5 0E Custom products are available on request. 82 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial = R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance 0,47 = R47 ±20% 25 Lead Form Terminal/ Pitch Size = M SMD: CD VS = BS CD VH = VH 1,0 = 010 CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q CD 261 = LK 100 = 101 CD 261X = QX 1 000 = 102 ±10% FF =K +50 / -10% = T 0611 JE xxxxx Dimension for Specials only 4x7 Taped = FF Terminal = T2 = 0407 5x11,5 = 0511 6,3x11,5= 0611 Radial: Long Lead = LL 2,0mm = 20 35x80 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 CD 262 = QM 10 000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90° - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions Ø DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 6,3 x5,4 6,3x 7,7 2,4 2,5 8 x 10,5 2,9 8 x 11,8 10x10,5 10x12,7 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 0,5 - 0,8 W 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm Allowable Range of Peak Temperature Size T (°C) t (second) t 1 (second) Ø 4 ~ 6,3 Ø 8 x 10,5 Ø 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L L≤7 L ≥ 11 ØD 3 4 5 6,3 8 5 6,3 8 F 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 Ø d 0,4 aMax 0,45 0,5 10 12,5 16 5,0 0,6 1,0 18 7,5 0,8 20 22 10,0 25 12,5 1,0 2,0 in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range ØD Dimensions Ammopack Form L (max) H ± 0,75 Ho ± 0,5 F ± 0,5 P ± 0,1 4~6 13 18,5 - 2,5 12,7 8 13 18,5 - 3,5 12,7 4~8 7 17,5 5 ~ 6,3 13 18,5 Form A A Form B FF 16 B 12,7 8 22 20,0 5 10 18,5 22 A FD 12,5 27 18,5 - 15,0 12,5 27 18,5 - 25,4 Form C C FF 16 ~ 18 18,5 27 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code CB CC CD CE CF I 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 preferred in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2