R 1W SILICON PLANAR ZENER DIODES S E M I C O N D U C T O R FEATURES DO-41(GLASS) Silicon planar power zener diodes 1.102(28) MIN For use in stabilizing and clipping circuits with high power rating. Standards Zener voltage tolerance is 10%. Add suffix "A" for 0.102(2.6) MAX DIA 5% tolerance Other tolerance available upon request 0.161(4.1) MAX MECHANICAL DATA Case: DO-41 glass case 1.102(28) MIN Weight: Approx. 0.35 gram 0.034(0.86) MAX DIA Dimensions in inches and (millimeters) ABSOLUTE MAXIMUM RATINGS(LIMITING VALUES) (TA=25 C) Zener current see table "Characteristics" Ptot TJ TSTG Power dissipation at TA=25 C Junction temperature Storage temperature range mW 11) 175 C -65 to+175 C 1) Valid provided that a distance of 8mm from case are kept at ambient temperature ELECTRICAL CHARACTERISTICS (TA=25 C) Thermal resistance junction to ambient air RthA 1701) Forward voltage at IF=200mA VF 1.2 1) Valid provided that a distance of 8mm from case are kept at ambient temperature C /W V Nominal Zener 3) Voltage Test Current Surge current 1) 1N4728 3.3 76 10 1N4729 3.6 69 10 1N4730 3.9 64 9 1N4731 4.3 58 9 1N4732 4.7 53 8 500 1N4733 5.1 49 7 1N4734 5.6 45 5 1N4735 6.2 41 2 1N4736 6.8 37 1N4737 7.5 1N4738 Maximum regulator Current 2) 1.0 1380 1.0 1260 252 1.0 1190 234 1.0 1070 217 1.0 970 193 550 1.0 890 178 600 2.0 810 162 3.0 730 146 3.5 4.0 660 133 34 4.0 5.0 605 121 8.2 31 4.5 6.0 550 110 1N4739 9.1 28 5.0 7.0 500 100 1N4740 10 25 7 7.6 454 91 1N4741 11 23 8 8.4 414 83 1N4742 12 21 9 9.1 380 76 1N4743 13 19 10 9.9 344 69 1N4744 15 17 14 11.4 304 61 1N4745 16 15.5 16 12.2 285 57 1N4746 18 14 20 13.7 250 50 1N4747 20 12.5 22 15.2 225 45 1N4748 22 11.5 23 16.7 205 41 1N4749 24 10.5 25 18.2 190 38 1N4750 27 9.5 35 20.6 170 34 1N4751 30 8.5 40 22.8 150 30 1N4752 33 7.5 45 25.1 135 27 1N4753 36 7.0 50 27.4 125 25 1N4754 39 6.5 60 29.7 115 23 1N4755 43 6.0 70 32.7 110 22 1N4756 47 5.5 80 35.8 95 19 1N4757 51 5.0 95 38.8 90 18 1N4758 56 4.5 110 42.6 80 16 1N4759 62 4.0 125 47.1 70 14 1N4760 68 3.7 150 51.7 65 13 1N4761 75 3.3 175 56.0 60 12 1N4762 82 3.0 200 62.2 55 11 1N4763 91 2.8 250 69.2 50 10 1N4764 100 2.5 350 76.0 45 9 100 400 50 1.0 10 0.5 700 750 0.25 1000 1500 3000 5 276 Notes: 1) The Zener impedance is derived from the 1KHz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units. 2) Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature 3) Measured under thermal equilibrium and DC test conditions. Admissible power dissipation versus ambient temperature (Valid provided that leads at a distance of 10mm from case are kept at ambient temperature) 1N4728...1N4764 W 1.0 Ptot 0.8 0.6 0.4 0.2 0 0 100 200 C Tamb