R 0.5W SILICON PLANAR ZENER DIODES S E M I C O N D U C T O R DO-35 FEATURES Standards zener voltage tolerance is +20%.Add suffix "A" for+10% 1.083(27.5) MIN tolerance and suffix "B" for +5% tolerance other tolerance, non standards and higher zener voltage upon request 0.079(2.0) MAX DIA 0.150(3.8) MAX MECHANICAL DATA Case: DO-35 glass case 1.083(27.5) MIN Polarity: Color band denotes cathode end 0.020(0.52) MAX DIA Weight: Approx. 0.13 gram Dimensions in inches and (millimeters) ABSOLUTE MAXIMUM RATINGS(LIMITING VALUES) (TA=25 C) Zener current see table "Characteristics" Ptot TJ TSTG Power dissipation at TA=75 C Junction temperature Storage temperature range 5001) mW 175 C -65 to+200 C 1) Valid provided that a distance of 8mm from case are kept at ambient temperature ELECTRICAL CHARACTERISTICS (TA=25 C) Thermal resistance junction to ambient air Forward voltage at IF=200mA RTHA VF 1) Valid provided that a distance of 8mm from case are kept at ambient temperature 0.3 1) 1.1 K/mW V Zener Voltage range 1) VZNOM 1N5221 V 2.4 1N5222 2.5 1N5223 2.7 1N5224 2.8 1N5225 3.0 1N5226 3) 1) IR2) at VR IZT mA mA A TKVz V %/K <1200 <100 <-0.085 <1250 <100 <-0.085 <1300 <75 <-0.080 <29 <1400 <1600 <75 <50 3.3 <28 <1600 <25 <-0.070 1N5227 3.6 <24 <1700 <15 <-0.065 1N5228 3.9 <23 <1900 <10 <-0.060 1N5229 4.3 <22 <2000 1N5230 4.7 <19 <1900 2.0 <+0.030 1N5231 5.1 <17 <1600 2.0 <+0.030 1N5232 5.6 <11 <1600 1N5233 6.0 <7 <1600 <30 20 <-0.080 1.0 <-0.075 <+0.055 5 3.0 <+0.038 3.5 <+0.038 1N5234 6.2 <7 <1000 1N5235 6.8 <5 <750 4.0 <+0.045 5.0 <+0.050 1N5236 7.5 <6 1N5237 8.2 <8 <500 6.0 <+0.058 <500 6.5 1N5238 8.7 <8 <+0.062 6.5 1N5239 9.1 <10 7.0 <+0.065 <+0.068 1N5240 10 <17 8.0 <+0.075 0.25 3 1N5241 11 <22 <2 8.4 <+0.076 1N5242 12 <30 <1 9.1 <+0.077 1N5243 13 9.5 <13 <0.5 9.9 <+0.079 1N5244 14 9.0 <15 10 <+0.082 1N5245 15 8.5 <16 11 <+0.082 1N5246 16 7.8 <17 12 <+0.083 1N5247 17 7.4 <19 13 <+0.084 1N5248 18 7.0 <21 14 <+0.085 1N5249 19 6.6 <23 14 <+0.086 <600 <0.1 Zener Voltage range 1) VZNOM V 3) 1) IR2) at VR IZT mA A TKVz V %/K 1N5250 20 mA 6.2 <25 15 1N5251 22 5.6 <29 17 <+0.087 1N5252 24 5.2 <33 18 <+0.088 <600 <+0.086 1N5253 25 5.0 <35 19 <+0.089 1N5254 27 4.6 <41 21 <+0.090 1N5255 28 4.5 <44 21 <+0.091 1N5256 30 4.2 <49 23 <+0.091 1N5257 33 3.8 <58 25 <+0.092 <700 1N5258 36 3.4 <70 <700 27 <+0.093 1N5259 39 3.2 <80 <800 30 <+0.094 1N5260 43 3.0 <93 <900 1N5261 47 2.7 <105 <1000 0.25 <0.1 33 <+0.095 36 <+0.095 1N5262 51 2.5 <125 <1100 39 <+0.096 1N5263 56 2.2 <150 <1300 43 <+0.096 1N5264 1N5265 60 62 2.1 2.0 <170 <185 <1400 <1400 46 47 <+0.097 <+0.097 1N5266 68 1.8 <230 <1600 52 <+0.097 1N5267 75 1.7 <270 <1700 56 <+0.098 1N5268 82 1.5 <330 <2000 62 <+0.098 1N5269 87 1.4 <370 <2200 68 <+0.099 1N5270 91 1N5271 100 1N5272 110 1N5273 120 <400 <2300 69 <+0.099 <500 -- -- 75 <+0.100 1.2 <700 -- -- 83 <+0.100 1.0 <950 -- -- 90 <+0.100 1.4 1.3 1N5274 130 0.95 <1100 -- -- 98 <+0.110 1N5275 140 0.90 <1300 -- -- 105 <+0.110 1N5276 150 0.85 <1500 -- -- 113 <+0.110 1N5277 160 0.80 <1700 <+0.115 170 0.74 <1900 --- 120 1N5278 --- 127 <+0.115 1N5279 180 0.68 <2200 0.66 <2400 --- <+0.120 190 --- 135 1N5280 142 <+0.120 1N5281 200 0.65 <2500 -- -- 150 <+0.120 1) The zener impedance is derived from the 60Hz AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT or IZK) is superimposed on IZT or IZK Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to elimunate unstable units. 2) Valid provided that leads at a distance of 8mm from case are kept at ambient temperature. 3) Measured under thermal equilibrium and DC test conditions. Admissible power dissipation versus ambient temperature (Valid provided that leads at a distance of 10mm from case are kept at ambient temperature) 1N5225... mW 500 Ptot 400 300 200 100 0 0 100 200 C Tamb