SR1620 THRU SR16200 (SINGLE CHIP) R SCHOTTKY BARRIER RECTIFIER Reverse Voltage - 20 to 200 Volts Forward Current - 16.0Amperes S E M I C O N D U C T O R FEATURES TO-263 D2PAK Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Metal silicon junction ,majority carrier conduction Guard ring for overvoltage protection Low power loss ,high efficiency JF SR1 26 06 50 High current capability ,Low forward voltage drop Single rectifier construction 0.420(10.67) 0.380(9.65) 0.190(4.83) 0.160(4.06) High surge capability 0.245(6.22) MIN For use in low voltage ,high frequency inverters, 0.055(1.40) 0.045(1.14) free wheeling ,and polarity protection applications 0.055(1.40) 0.047(1.19) High temperature soldering guaranteed:260 C/10 seconds, 0.360(9.14) 0.25"(6.35mm)from case 0.639(16.22) 0.560(14.22) 0.320(8.13) 1 Component in accordance to RoHS 2002/95/EC and K 2 WEEE 2002/96/EC MECHANICAL DATA 0.131(3.32) 0.090(2.29) 0.095(2.41) 0.037(0.940) 0.027(0.686) 0.083(2.10) Case: JEDEC TO-263 molded plastic body 0.018(0.46) 0.134(3.40) 0.014(0.35) 0.110(2.79) Terminals: Solderable per MIL-STD-202,method 208 Polarity: As marked Dimensions in inches and (millimeters) Mounting Position: Any Weight: 0.08ounce, 2.24 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Ratings at 25 C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive load. For capacitive load,derate by 20%.) Symbols Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current See Fig.1 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum instantaneous forward voltage at 16.0 A Maximum instantaneous reverse current at rated DC blocking voltage(Note 1) T C =25 C T C =125 C SR 1650 SR 1660 SR 1680 SR 16A0 SR 16150 20 30 40 50 60 80 100 150 200 14 21 28 35 42 56 70 105 140 20 30 40 50 60 80 100 150 200 SR 16200 Units Volts Volts Volts 16.0 Amps IFSM 200.0 Amps VF IR R TJ TSTG 0.60 0.85 0.75 0.5 30 50 3.0 JC -65 to+125 0.90 0.95 Volts mA C/W -65 to+150 -65 to+150 C C s pulse width,1% duty cycle 2.Thermal resistance from junction to case JINAN JINGHENG CO., LTD. SR 1640 I(AV) Operating junction temperature range Notes: 1.Pulse test: 300 SR 1630 VRRM VRMS VDC Typical thermal resistance (Note 2) Storage temperature range SR 1620 1-128 NO.51 HEPING ROAD JINAN P.R. CHINA TEL:86-531-86943657 FAX:86-531-86947096 WWW.JIFUSEMICON.COM RATINGS AND CHARACTERISTIC CURVES SR1620-SR16200(SINGLE CHIP) FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 40 20 SR1620 - SR1640 SR1650 - SR16200 16 INSTANTANEOUS FORWARD CURRENT( AMPERES) AVERAGE FORWARD CURRENT (AMPERES) FIG.1-FORWARD CURRENT DERATING CURVE 12 8.0 SINGLE PHASE HALF WAVE 50Hz 4.0 INDUCTIVE OR RESISTIVE LOAD 0 0 50 100 150 LEAD TEMPERATURE ( C) FIG.4-TYPICAL JUNCTION CAPACITANCE TC=25 C 1.0 PULSE WIDTH=300 S 1% DUTY CYCLE 0.1 4000 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 SR1650-SR16200 2000 CAPACITANCE(pF) TC=125 C 10 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) SR1620-SR1640 1000 FIG.3-TYPICAL REVERSE CHARACTERISTICS 100 200 100 0.1 0.4 1.0 10 40 60 100 (mA) TC=125 C INSTANTANEOUS REVERSE CURRENT REVERSE VOLTAGE (VOLTS) FIG.5-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT(AMPERES) 250 200 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 150 100 10 TC=75 C 1.0 TC=25 C 0.1 50 0 1.0 2.0 5.0 10 20 50 0.01 100 0 20 40 60 80 100 120 140 NUMBER OF CYCLES AT 60Hz PERCENT OF RATED PEAK REVERSE VOLTAGE 1-129 JINAN JINGHENG CO., LTD. NO.51 HEPING ROAD JINAN P.R. CHINA TEL:86-531-86943657 FAX:86-531-86947096 WWW.JIFUSEMICON.COM