KINGBRIGHT APED3528SRC-F01

3.5 x2.8mm SMD CHIP LED LAMP
Part Number: APED3528SRC-F01
SUPER BRIGHT RED
Features
zSINGLE
Description
COLOR.
zSUITABLE
The Super Bright Red source color devices are made with
FOR ALL SMT ASSEMBLY AND SOLDER
Gallium Aluminum Arsenide Red Light Emitting Diode.
PROCESS.
zIDEAL
FOR BACKLIGHTING.
zAVAILABLE
ON TAPE AND REEL.
zPACKAGE:
500PCS / REEL.
zMOISTURE
SENSITIVITY LEVEL : LEVEL 3.
zRoHS
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAF1355
REV NO: V.2
DATE: SEP/06/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1203001141
Selection Guide
Dice
Part No.
APED3528SRC-F01
Lens Type
SUPER BRIGHT RED (GaAlAs)
WATER CLEAR
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
2θ1/2
70
200
40°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Super Bright Red
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
660
nm
IF=20mA
Super Bright Red
640
nm
IF=20mA
Spectral Line Half-width
Super Bright Red
20
nm
IF=20mA
C
Capacitance
Super Bright Red
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Red
1.85
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Red
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Red
Units
Power dissipation
100
mW
DC Forward Current
30
mA
Peak Forward Current [1]
155
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF1355
REV NO: V.2
DATE: SEP/06/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1203001141
Super Bright Red
APED3528SRC-F01
SPEC NO: DSAF1355
REV NO: V.2
DATE: SEP/06/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1203001141
APED3528SRC-F01
Recommended Soldering Pattern
(Units: mm ; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAF1355
REV NO: V.2
DATE: SEP/06/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1203001141
PACKING & LABEL SPECIFICATIONS
APED3528SRC-F01
SPEC NO: DSAF1355
REV NO: V.2
DATE: SEP/06/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: W.J.ZHU
ERP: 1203001141