KINGBRIGHT APJA2107SYCK

2.1x0.7mm RIGHT ANGLE SMD CHIP LED
LAMP
APJA2107SYCK
Features
SUPER BRIGHT YELLOW
Description
2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm
The Super Bright Yellow source color devices are made
THICKNESS.
with DH InGaAlP on GaAs substrate Light Emitting Diode.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACKLIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
SPEC NO: DSAD1030
REV NO: V.4
DATE: MAR/19/2005
PAGE: 1 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001555
Selection Guide
Part No.
Dice
APJA2107SYCK
Iv (mcd)
@ 20mA
Lens Type
SUPER BRIGHT YELLOW (InGaAIP)
WATER CLEAR
Viewing
Angle
Min.
Typ.
2θ
θ1/2
18
100
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Yellow
λD
Dominant Wavelength
∆λ1/2
Max.
Units
Test Conditions
590
nm
IF=20mA
Super Bright Yellow
590
nm
IF=20mA
Spectral Line Half-width
Super Bright Yellow
20
nm
IF=20mA
C
Capacitance
Super Bright Yellow
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Super Bright Yellow
2.0
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Yellow
Units
125
mW
DC Forward Current
30
mA
Peak Forward Current [1]
175
mA
5
V
Power dissipation
Reverse Voltage
Operating/Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1030
REV NO: V.4
DATE: MAR/19/2005
PAGE: 2 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001555
Super Bright Yellow
APJA2107SYCK
SPEC NO: DSAD1030
REV NO: V.4
DATE: MAR/19/2005
PAGE: 3 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001555
APJA2107SYCK
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1030
REV NO: V.4
DATE: MAR/19/2005
PAGE: 4 OF 4
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: Y.CHENG
ERP: 1203001555