4.1 x 1.0mm RIGHT ANGLE SMD CHIP LED LAMP APKA4110SURC Features z4.1mm x 1.0mm RIGHT ANGLE SMT LED, 1.52mm THICKNESS. HYPER RED Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting zLOW POWER CONSUMPTION. Diode. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS/REEL. zRoHS COMPLIANT. Package Dimensions N ot es : 1. A l l di m ens i ons are i n m i l l i m et ers (i nc hes ). 2. T ol eranc e i s ±0. 25(0. 01" ) unl es s ot her wi s e not e d. 3. S pec i f i c at i ons a re s ubj e c t t o c hange wi t hout n ot i c e. SPEC NO: '6$D1191 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 1 OF 5 ERP:1204000262-01 Selection Guide Part No. Dice APKA4110SURC Iv (mcd) @ 20mA Lens Type HYPER RED (InGaAlP) WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 70 220 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 640 nm IF=20mA Hyper Red 628 nm IF=20mA Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: '6$D1191 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 2 OF 5 ERP:1204000262-01 Hyper Red APKA4110SURC SPEC NO: '6$D1191 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 3 OF 5 ERP:1204000262-01 APKA4110SURC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: '6$D1191 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 4 OF 5 ERP:1204000262-01 PACKING & LABEL SPECIFICATIONS APKA4110SURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: '6$D1191 REV NO: V.3 DATE:JUL/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 5 OF 5 ERP:1204000262-01