Pb Lead-Free Parts LPT9033/TR1 NPN SILICON PHOTOTRANSISTOR LED LAMPS SERIES Page:1/3 Package Dimension Collector 4.6±0.5 2.5 A0 K0 0.5±0.1 2.0 0.4±0.1 W1 ψ1.9 F E 1.4 2.8 P2 0.16 2 P t P0 D0 Collector 0.7 1 B0 W 0.4 1.EMITTER 2.COLLECTOR Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted 2.Specifications are subject to change without notice •MAXIMUM RATINGS(Ta=25℃) MAXIMUM RATINGS UNIT Power Dissipation 100 mw Collector-Emitter Voltage 30 V Emitter-Collector Voltage 5 V PARAMETER Operating Temperature -50℃ TO +100℃ Storage Temperature -50℃ TO +100℃ 260℃ for 5 seconds Lead Soldering Temperature(1.6mm From Body) •ELECTRICAL CHARACTERISTICS(Ta=25℃) Typ. UNIT TEST CONDITION 30 V Ic=1mA Ee=0mw/c㎡ 5 V IE=100μA Ee=0mw/c㎡ V Ic=0.5mA Ee=20mw/c㎡ PARAMETER SYMBOL Min. Collector-Emitter Breakdown Voltage V(BR)CEO Emitter-Collector Breakdown Voltage V(BR)ECO Collector-Emitter Saturation Voltage VCE(sat) Max. 0.4 Rise Time Tr 5 μs Fall Time Tf 5 μs Collector Dark Current On State Collector Current ICEO Ip(on) 100 nA 1 2 mA 2 4 mA 4 8 mA 8 DOC. NO : QW0905-LPT9033/TR1 VCE =30V IC=800μA,RL=1K Ω VCE =10V Ee=0mw/c㎡ VCE =5v Ee=1mw/c㎡ λP=940nm mA REV. : D DATE : 04 - Aug - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LPT9033/TR1 NPN SILICON PHOTOTRANSISTOR LED LAMPS Page:2/3 •Dimensions Symbol Information Symbol Dimension Tol. ±0.2 Length Direction P2 2.0 ±0.2 4.85 ±0.2 Width Direction F 5.5 ±0.2 Ko 3.32 ±0.2 Symbol Dimension Tol. P 4.0 ±0.2 Diameter Do 1.5 ±0.2 Pitch Po 4.0 ±0.2 Distance E 1.75 ±0.2 Symbol Dimension Tol. W1 9.3 ±0.2 0.1 max Symbol Dimension Length Ao 2.16 Width Bo Depth Pitch Compartment Carrier Tape Width Thickness Centers Line Tol. Symbol Dimension Tol. W 12 ±0.3 t 0.3 ±0.2 Sprocket Hole Fixing Tape Width Thickness •Configuration Of Reel And Flange Note:dimension in mm Symbol Dimension Tol. Diameter A 178 +0 -2 Space Between Flanges T 16 ±1 Key Slit Symbol Dimension Tol. Flange T C A B Width Hub Diameter Hub B 20 ±1.5 Symbol Dimension Tol. TRAILER LEADER Spindle Hole C 12.5 ±1 FIXING TAPE •Ordering Information Part No. Description Quantity/Reel LPT9033/TR1 12mm tape,7"reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/3 PART NO. LPT9033/TR1 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 280℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec Preheat 120 ~ 150℃ 120 ~ 180 sec 3-1. LEAD Reflow Solder Temp. (℃) 240 Rising +5 ℃/sec Cooling -5℃/sec Preheat 150 120 60 ~ 120 sec Time 5sec 3-2 PB-Free Reflow Solder 1~5° C/sec Preheat 180~200° C 1~5° C/sec 260° C MaX. 10sec.Max Above 220° C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times.