SG55451B/SG55461/SG55471 SG75451B/SG75461/SG75471 DUAL PERIPHERAL POSITIVE-AND DRIVER DESCRIPTION FEATURES The SG5541B/SG55461/SG55471 (SG75451B/SG75461/SG75471) series of dual peripheral Positive-AND drivers are a family of versatile devices designed for use in systems that employ TTL or DTL logic. This family of drivers are direct replacements for the Texas Instruments SN55451B/61/71 (SN75451B/61/71)series. Diode-clamped inputs simplify circuit design. Typical applications include high-speed logic buffers, power drivers, relay drivers, MOS drivers, line drivers, and memory drivers. The SG55451B/SG55461/SG55471 drivers are characterized for operation over the full military ambient temperature range of -55°C to 125°C and the SG75451B/SG75461/SG75471 drivers are chracterized for operation from 0°C to 70°C. • • • • • • EQUIVALENT CIRCUIT SCHEMATIC (each driver) 300mA output current capability High-voltage output No output latch-up at 20V High speed switching TTL or DTL compatible diode-clamped inputs Standard supply voltages HIGH RELIABILITY FEATURES - SG55451B/SG55461/SG55471 ♦ Available to MIL-STD-883 ♦ Scheduled for MIL-M-38510 QPL listing ♦ LMI level "S"processing available BLOCK DIAGRAM Positive Logic: Y = AB FUNCTION TABLE (each gate) A B Y L L L (on-state) L H L (on-state) H L L (on-state) H H H (off-state) H = High Level, L = Low Level LINFINITY 5/92 Rev 1.1 2/94 Copyright 1994 1 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 SG55451B/61/71 SERIES ABSOLUTE MAXIMUM RATINGS (Note 1) Supply Voltage (VCC) ............................................................ 7V Input Voltage ..................................................................... 5.5V Interemitter Voltage ........................................................... 5.5V Off-state Output Voltage X5451B Series ................................................................ 30V X5461 Series .................................................................. 35V X5471 Series .................................................................. 70V Output Current ............................................................. 400mA Continuous Total Dissipation at (or below) 25°C Free-Air Temperature ..................................... 800mW Operating Junction Temperature Hermetic (Y, L Packages) .......................................... 150°C Storage Temperature Range .......................... -65°C to 150°C Lead Temperature (1/16 inch from case for soldering 60 sec.) ................................................. 300°C Note 1. Exceeding these ratings could cause damage to the device. THERMAL DATA Y Package: Thermal Resistance-Junction to Case, θ JC .................. 50°C/W Thermal Resistance-Junction to Ambient, θ JA ............ 130°C/W L Package: Thermal Resistance-Junction to Case, θ JC .................. 35°C/W Thermal Resistance-Junction to Ambient, θ JA ............ 120°C/W RECOMMENDED OPERATING CONDITIONS (Notes Note A. Junction Temperature Calculation: TJ = TA + (PD x θ JA). Note B. The above numbers for θJC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θJA numbers are meant to be guidelines for the thermal performance of the device/pcboard system. All of the above assume no ambient airflow. 2 & 3) Supply Voltage (VCC) SG55451B, SG55461, SG55471 ....................... 4.5V to 5.5V SG75451B, SG75461, SG75471 ................... 4.75V to 5.25V Operating Ambient Temperature Range SG55451B, SG55461, SG55471 ................... -55°C to 125°C SG75451B, SG75461, SG75471 ........................ 0°C to 70°C Note 2. Range over which device is functional. Note 3. The substrate (pin 8) must always be at the most-negative device voltage for proper operation. ELECTRICAL CHARACTERISTICS (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG55451B/461/471 with -55°C ≤ TA ≤ 125°C, and SG75451B/461/471 with 0°C ≤ TA ≤ 70°C. Typical values are tested at V CC = 5V, and T A = 25°C. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) Parameter High-level Input Voltage (VIH) Low-level Input Voltage (VIL) Input Clamp Voltage (VIK) High-level Output Current (IOH) Low-level Output Voltage (VOL) Input Current at Max VIN (IIN) High-level Input Current (IIH ) Low-level Input Current (IIL) Supply Current, Outputs High Supply Current, Outputs Low Test Conditions VCC = MIN, IIN = -12mA VCC = MIN, VIH = 2V, VOH = 30V SGX5451B VOH = 35V SGX5461 VOH = 70V SGX5471 VCC = MIN, VIL = 0.8V, IOL = 100mA VCC = MIN, VIL = 0.8V, IOL = 300mA VCC = MAX, VIN = 5.5V VCC = MAX, VIN = 2.4V VCC = MAX, VIN = 0.4V VCC = MAX, VIN = 5V VCC = MAX, VIN = 0V SGX5451B SGX5461 SGX5471 0.25 0.5 0.5 0.8 1.0 60 -1.0 -1.6 8 11 52 56 56 65 76 76 -1.0 8 0.4 0.7 1.0 60 -1.6 11 V V mA µA mA mA 52 56 56 65 76 76 mA mA mA 0.25 0.5 LINFINITY 5/92 Rev 1.1 2/94 Copyright 1994 SG55451B SG75451B SG55461 SG75461 Units SG55471 SG75471 Min. Typ. Max. Min. Typ. Max. V 2 2 V 0.8 0.8 -1.2 -1.5 V -1.2 -1.5 300 100 µA 2 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570 SG55451B/61/71 SERIES SWITCHING CHARACTERISTICS Parameter Propagation Delay Time, Lowto-High Level Output Propagation Delay Time, Highto-Low Level Output Transition Time, Low-to-High Output Transition Time, High-to-Low Level Output High-Level Output Voltage After Switching (Note 1) (VCC = 5V, TA = 25°C) SG55451B SG55461 SG55471 SG75451B SG75461 SG75471 Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 25 30 110 30 110 ns 18 Test Conditions IC = 200mA, CL = 15pF, RL ≈ 50Ω IC = 300mA, VS = 20V SGX5451B VS = 30V SGX5461 VS = 55V SGX5471 18 25 25 80 25 80 ns 5 8 8 25 8 25 ns 7 12 10 25 10 25 ns VS-6.5 mV mV mV VS-10 VS-18 Note 1. These parameters, although guaranteed, are not tested in production. CONNECTION DIAGRAMS & ORDERING INFORMATION Package 8-PIN CERAMIC DIP Y - PACKAGE 20-PIN CERAMIC LEADLESS CHIP CARRIER L- PACKAGE Part No. (See Notes Below) Ambient Temperature Range SG55451BY/883B SG55451BY SG55461Y/883B SG55461Y SG55471Y/883B SG55471Y SG75451BY SG75461Y SG75471Y -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C -55°C to 125°C 0°C to 70°C 0°C to 70°C 0°C to 70°C SG55451BL/883B SG55451BL SG55461L/883B SG55461L SG55471L/883B SG55471L -55°C -55°C -55°C -55°C -55°C -55°C to to to to to to 125°C 125°C 125°C 125°C 125°C 125°C Connection Diagram 1. N.C. 2. 1A 3. N.C. 4. N.C. 5. 1B 6. N.C. 7. 1Y 8. N.C. 9. N.C. 10. GND VCC 1A 1B 1 8 2 7 2B 1Y GND 3 6 4 5 2A 2Y 3 2 1 20 19 4 18 5 17 6 16 7 15 8 14 9 10 11 12 13 11. N.C. 12. 2Y 13. N.C. 14. N.C. 15. 2A 16. N.C. 17. 2B 18. N.C. 19. N.C. 20. VCC Note 1. Contact factory for JAN and DESC product availability. 2. All parts are viewed from the top. 3. Product is also available in flat pack. Consult factory for price and delivery. LINFINITY 5/92 Rev 1.1 2/94 Copyright 1994 3 Microelectronics Inc. 11861 Western Avenue ∞ Garden Grove, CA 92841 (714) 898-8121 ∞ FAX: (714) 893-2570