LUMINIS LX140

Semi-recessed wall mount
L U M I N IS
1
2
3
4
5
6
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
Alternate on
site mounting
configuration
19 1/2”
7
5 1/2”
- Pulse rated medium base porcelain socket.
- 75W/600V thermoplastic compact fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
- Cast aluminum swing out hinge mechanism for quick
maintenance access.
1 - Wall recessed galvanized housing , with isolated connection
compartment . A set of 18” lg. adjustable
mounting bars are provided.
7/8” KO power feed holes are provided on each side
2 - Cast aluminum isolated ballast compartment
3 - 1/2” aluminum solid stand off rods.
4 - One piece copper free cast aluminum pyramid housing available
with closed or open luminous faces.
5 - Heavy wall borosilicate frosted glass diffuser
with inner linear prismatic pattern for structural reinforcement.
6 - White translucent high impact frosted acrylic
triangular lens diffuser..
7 - Stainless steel captive hexagonal cap screws .
LX140:
LX143:
10 1/2”
3 1/2”
LUXOR
LX140 . LX143 . LX144
Specification
14”
LX144:
Enclosed pyramid front housing with back light wall washer.
Pyramid front housing with triple triangular openings and
back light wall washer.
Pyramid front housing with quad triangular openings and
back light wall washer.
12 1/2”
Photometry
LX140
Certification
LX143
LX144
Mounting
UL. Wet Location.
90
Max.weight: 32 lbs.
Installation: requires a recessed box (By Luminis)
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
60
30
Model#
Light source selection
MH (ED17)
M70
M100
LX140
LX143
LX144
CF (Gx24q)
Single lamp
F132
F142
F157
F170
HPS (ED17)
H70
H100
CF (Gx24q)
Two lamp
F226
F232
F242
(Lamps by others)
Voltage
For options details and
specifications, please refer to
pages 72.
Finish
120 V Standard factory
(Refer to color chart)
prewired
Standard selection
(If no voltage is specified)
WHT:Snow white
For other voltages, please
specify with catalog number.
BKT: Jet black
BZT: Bronze
H.I.D.
GRT: Titanium gray
208 V
DGT: Gun metal
240 V
CHT: Champagne
277 V
MST: Matte silver
347 V
GNT: Forest green
Optional colors
CS: Custom color
COMP. FLUO.
RAL: RAL# color
Smart ballast 120/277
Options
Electrical
FS:
Fuse
EM42S: 1 lamp (26/32/42W)
EM battery.
Note: EM optional battery
test switch and pilot lamp are
installed remotely.
(Refer to page 72)
347 V (To specify)
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 51
Web: www.luminis.com
Sept. 2006 Rev: Feb.2007
L U M I N IS
OPTIONAL MOUNTING AND ACCESSORIES
3”
Front view
A
4 5/8”
1/2” dia. natural stainless
steel rod support
Mounting plate A
17 3/4”
17 3/4”
22”
6 3/8”
45º
B
Tubular ballast enclosure
with removable access
bottom cover
ACW2
Wall mount
5 5/8”
5 1/8”
LUXOR
Mounting plate B
12 1/4”
6 1/4”
Max weight:
(luminaire included)
H.I.D: 38 lbs.
C.F.: 29 lbs
33”
Power supply
LX120-ACW2
Compact fluorescent
LX124-ACW2
H.I.D
Extruded aluminum wall mounted adaptor . 5” dia.x 12 3/4” lg. tubular ballast enclosure with removable cover for access to ballast tray.
Cast aluminum wall mounted plate. 1/2” dia.stainless steel rod support. Extruded arm and all other parts are painted same color as luminaire .
33”
Front view
8”
1/2” dia. natural
stainless steel rod
support
22”
45 deg.
LX150-PC
LX150-PH
E.P.A.: .74
Extruded aluminum side pole mounting
adaptor. 2” X 4” Extruded arm and all other
parts are painted same color as luminaire..
LX120-ACA2
Compact fluorescent
LX124-ACA2
H.I.D
E.P.A.: 2.0
Extruded aluminum side pole mounting adaptor.
1/2” dia. stainless steel natural rod support.
Extruded arm and all other parts are painted same
color as luminaire.
* Note: 36” extension with ACA2 attachment
24” extension with LX150PC / LX150PH
attachment
OAL pole
height
Mounting
12-14 or 16ft. style
* Note
PXD
pole
style
PCA
pole
style
PAA
pole
style
Compact fluorescent
H.I.D
Compatible poles listing.
Post side mount for
LX150PH
(For Luxor HID.)
Post side mount for
LX150PC
(For Luxor Compact Fluoresecnt.)
4”O.D.
5”O.D.
PAA410-APC
PAA412-APC
PAA414-APC
PAA416-APC
PAA418-APC
PAA420-APC
PAA510-APC
PAA512-APC
PAA514-APC
PAA516-APC
PAA518-APC
PAA520-APC
4”O.D.
PCA12-APC
PCA14-APC
PCA16-APC
4”O.D.
PXD10-APC
PXD12-APC
PXD14-APC
PXD16-APC
PXD18-APC
PXD20-APC
5”O.D.
PAA510-APC
PAA512-APC
PAA514-APC
PAA516-APC
PAA518-APC
PAA520-APC
Pole
height
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with ACA2 attachment accessory
Post top mounting for
LX120-ACA2 and LX124-ACA2
Mounting
style
PAA514-ACA
PAA516-ACA
PAA518-ACA
PAA520-ACA
60”
14 ft
16 ft
18 ft
20 ft
For poles details and specification, please
refer to pages 140 to 144
luminaires may be altered for design improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 54
Web: www.luminis.com
Sept. 2006 Rev: Feb.2007