LUMINIS W1222

SYRIOS
L U M I N IS
W1222
Specification
All exposed cast aluminum components are made of non corrosive
pure aluminum copper free (Aluminum is less than .1% copper
content.#356 alloy.)
Finish: All polyester powder baked coatings preceded with
a 5 baths preparation process. Meets military grade
MIL-C781706 with a 2000 hours salt spray test.
1
- Pulse rated porcelain socket or 75W/600V thermoplastic compact
fluorescent socket.
- One-piece molded silicone gasket with memory retention.
- High power factor CWA ballast. Or 98% P.F.electronic smart
ballast with end of life detection for compact fluorescent.
- All stainless steel hardware.
- All Moving and removable parts are sealed with a
memory retention silicone gasket.
2
3
4
5
Alternate model with internal lamp adjustability
allowing a 358º rotation X 30º tilt from vertical
position with P39/P70/P100 H.I.D. sources.
12345-
Cast aluminum ballast housing.
Cast aluminum modular optical light chamber.
Semi-specular aluminum reflector.
Clear tempered lens.
Cast aluminum sealed lens frame.
W1222S : 18” dia. Full cutoff aluminum shade.
W1222L : Set of three cast aluminum louver blades.
Note:
W1222 series is a modular luminaire offered
with an array of standard or optional
attachments, to meet multiple installation
requirements. Please specify desired
mounting accessory with model number.
(Refer to page127)
Photometry
20”
14 1/2”
18 1/2”
9 1/2”
18”
W1222
W1222S
W1222L
EPA: 0.37
EPA: 0.48
EPA: 0.41
90
UL. Wet Location.
Model#
Mounting
APA2
ACA2
ACW2
APS2
APC2
S
T2
W2
30
Max. weight: 27 lbs.
Light source selection
MH (ED17)
W1222
W1222S
W1222L
60
Mounting
Certification
Separate updated technical
specification sheets with related
models and light sources with
I.E.S formatted photometry are
available on
www.luminis.com.
M70
M100
M150
M175
HPS (ED17)
H70
H100
H150
CF (Gx24q)
Single lamp
F142
F157
CF (Gx24q)
Two lamp
F226
F232
PAR lamps
PH39 (PAR20)
PH70 (PAR30L)
PH100 (PAR38)
(Lamps by others)
Adjustable
lamps
Voltage
120 V Standard
factory prewired
(If no voltage is
specified)
For other voltages,
please specify with
catalog number.
H.I.D.
208 V
240 V
277 V
347 V
Compact
fluorescent smart
ballast 120/277
Please refer to pages
127 &128 for additional details.
Finish
(Refer to color chart)
Standard selection
WHT:Snow white
BKT: Jet black
BZT: Bronze
GRT: Titanium gray
DGT: Gun metal
CHT: Champagne
MST: Matte silver
GNT: Forest green
Optional colors
CS: Custom color
RAL: RAL# color
347 V
(To specify)
Options
STM60:
STM80:
STC:
SW45:
Mounting
60” lg.suspension stem.
80” lg.suspension stem.
Safety cable.
45º hang straight swivel.
EM42S:
FS:
PH1:
PH2:
QS:
QRS:
Electrical
1 lamp (26/32/42W)
Fuse
120/277V photo cell.
347V photo cell.
Standby lamp socket.
H.I.D. lamp restrike
EM42S option is available with
-S / -W2 / ACW2 / -T Mounting
styles.
EM optional battery test switch and
pilot lamp are installed remotely.
(See page 103)
M150- M175 & H150 are only available with dedicated 5” dia. poles
Ballast located in line at post top, with easily removable tray.
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 119
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
L U M I N IS
SYRIOS
Mounting attachments for W1222 Series
20 1/2”
36”
14”
23”
14 1/2”
28 1/2”
6”
21 1/2”
9 1/2”
-S 15º swivel ceiling mount with 5/8”
-W2 -1 1/2” Dia. shepherd
-APA2 -1 1/2” Dia.
-APS -1 1/2” Dia.
dia.X36”lg. aluminum stem. Luminaire
top adaptor allowing to cut stem to
length on site.(Mounts over a standard
4" octagonal box with 3 1/2" C/C holes)
aluminum arm wall mount,
with a cast aluminum wall
cover and galvanized steel
mounting plate.
shepherd aluminum side
pole mount.
(EPA:1.12)
shepherd aluminum post
top mount, with a cast
aluminum tenon to fit with
a 3 3/4” I.D. pole
(EPA:1.17)
4 1/2”
29”
14”
15”
17 3/4”
14 1/2”
Power supply
6 1/2”
Power supply
29 3/4”
-ACA2 -1” x 3” extruded
-ACW2 -1” x 3” extruded
-T2 -1” x 3” extruded
-APC2 -1” x 3” extruded
aluminum Davit arm pole mounting
adaptor designed to fit with 4 to 5”
dia. poles.1/2” dia.X 45º standard
natural stainless steel rod support
(EPA:1.58)
aluminum Davit arm wall mounting
adaptor with cast aluminum covers
and galvanized steel mounting
plates. 1/2” dia.X 45º standard
natural stainless steel rod support.
aluminum wall mounting
straight adaptor with cast
aluminum cover and
galvanized steel mounting
plate.
aluminum side pole
mounting straight adaptor
(EPA:1.3)
Compatible poles listing.
Post side mount with APA2 attachment accessory
Mounting
style
* Note:
36” extension with ACA2 attachment
24” extension with APA2 & APC2 attachment
4”O.D.
PAA410-APA
PAA412-APA
PAA414-APA
PAA416-APA
PAA418-APA
PAA420-APA
5”O.D.
PAA510-APA
PAA512-APA
PAA514-APA
PAA516-APA
PAA518-APA
PAA520-APA
4”O.D.
PCA12-APA
PCA14-APA
PCA16-APA
4”O.D.
PXD10-APA
PXD12-APA
PXD14-APA
PXD16-APA
PXD18-APA
PXD20-APA
Pole
height
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with APC2 attachment accessory
OAL pole height
12-14 or 16ft.
PAA410-APC
PAA412-APC
PAA414-APC
PAA416-APC
PAA418-APC
PAA420-APC
Post top mount
* Note
4”
PXD
pole
style
PCA
pole
style
PCA
pole
style
PAA510-APC
PAA512-APC
PAA514-APC
PAA516-APC
PAA518-APC
PAA520-APC
PCA12-APC
PCA14-APC
PCA16-APC
PXD10-APC
PXD12-APC
PXD14-APC
PXD16-APC
PXD18-APC
PXD20-APC
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with APS attachment accessory
PAA
pole
style
PAA410-A
PAA412-A
PAA414-A
PAA416-A
PAA418-A
PAA420-A
PAA510-A1
PAA512-A1
PAA514-A1
PAA516-A1
PAA518-A1
PAA520-A1
PCA10-A
PCA12-A
PCA14-A
PCA16-A
PXD10-A
PXD12-A
PXD14-A
PXD16-A
PXD18-A
PXD20-A
10 ft
12 ft
14 ft
16 ft
18 ft
20 ft
Post side mount with ACA2 attachment accessory
60”
PAA414-ACA
PAA416-ACA
PAA418-ACA
PAA420-ACA
PAA514-ACA
PAA516-ACA
PAA518-ACA
PAA520-ACA
PCA14-ACA
PCA16-ACA
PXD14-ACA
PXD16-ACA
PXD18-ACA
PXD20-ACA
14 ft
16 ft
18 ft
20 ft
For poles details and specification, please refer to pages 140 to 144
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 127
Web: www.luminis.com
Sept. 2006 Rev. Feb.2007
L U M IN I S
Slope ceiling adaptor
Longer suspension stem
Option: SW45
45º hang straight ball swivel
for 5/8” dia. suspension stem.
45º hang straight ball swivel
for 5/8” dia. suspension stem.
with adaptor plate for W1250S
SB45
Suspension power cord
option for:
W1250S
3/18 X 36”lg. power cord with
adjustable aircraft cable.
SPB Black power cable only
with options
EM42
EM242
QS
STA60:
STM80
STA80:
60” lg.X5/8” O.D.
suspension stem.
80” lg. X5/8” O.D.
suspension stem.
For other factory cut to size length add
suffix -STM with desired length to
catalog# max.120”
Stems can be cut on site
and rethreaded externally
(Tap size 1/4 IPS / 1/4-18)
3/18 Spiral power cord Max. 277V
Standard extended length: 3ft.
Not applicable when using options
EM42
EM242
QS
Safety suspension cable
Overall length change:
Option: STC
Option: STM2
Safety aircraft suspension cable,
for applications with earthquake
regulations.
Cables extends 18” beyond
canopy.
(Secured to building structure)
Change total suspension length fro
standard length.
Specify desired length in inches.
EX: STM2-72”
STM2-
Quartz lamp restrike
Quartz lamp restrike
Option: QRS
STM60
Spiral suspension power cord
Option: TCW (White)
TCB (Black)
Option: SPW (White)
SPB (Black)
Note: cable size
and type may
change at factory
discretion upon
availability, to
accommodate
required wiring
with selected
option.
Option
* STA
Option: SB45
SW45
SYRIOS
Optional accessories
Quartz restrike standby lamp kit.
When power failure is restored, it
will energize temporary Quartz
lamp with progressive dimming
until full H.I.D light output is
produced.
max.100w DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
Option: QS
EM42 wiring
Emergency battery back-up
EM42 / EM42S
HOT
EM Ballast wiring
diagram for 120V
factory connection.
Note: Use of Emergency battery, requires periodic
and regular testing to ensure correct operation.
(please refer to manufacturer’s instructions.
EM42S wiring
BLK
WHT
One lamp:
26w: 450 Lmns..
32w: 575 Lmns.
42w: 750 Lmns.
Time: 90 Mnts -120/277V / T 0º C
Quartz lamp socket for external
120V emergency power input.
Separate 120V dedicated wiring is
included.
max.100 W DC bayonet type.
(Lamp is not included.)
Not Applicable with CFL lamps.
WHT
Note:
AC ballast
EM
ballast
Black/120V (Factory wired)
Orange/277V
(Cap unused lead.)
COM
For 57w & 70w:
(Remote installation only) Consult factory
EM42 option is
supplied with integral
test switch and pilot
light.
EM42S is supplied
with additional wiring
for external remotely
installed test switch
and pilot light.
Single pole test switch (Breaking the connection)
Luminaries may be altered for improvements or discontinued without prior notice.
LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309
LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5
Tel: 954 .717 .4155 Fax: 954 . 717.4157
Toll free: 888 .401 .6999
Page 128
Web: www.luminis.com
Sept. 2006 JAN.2008