FEATURES PCB MOUNTING LEDs - Ø 3mm 113 SERIES l Material conforms to UL94 V-O flammability ratings PACK QUANTITY = 250 PIECES l Up to 8 units may be integrated in 1 array with a rugged l Multi-colour options available l Reverse polarity options available l Product illustrated 113-314-04 l Typically available ex stock tie bar SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure up to = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE Vopr lopr lv@20mA λp Topr Tstg 627 -40 ~ +85^ -40 ~ +85 DC DC INTENSITY LENGTH TEMP TEMP STANDARD INTENSITY 113-305-04 Red Colour Diffused 2.0* 20 40 Yes 113-311-04 Yellow Colour Diffused 2.1* 20 30 590 -40 ~ +85^ -40 ~ +85 Yes 113-314-04 Green Colour Diffused 2.2* 20 40 565 -40 ~ +85^ -40 ~ +85 Yes 113-330-04 Red/Green White Diffused 2.0/2.2* 20 20/16 627/565 -40 ~ +85^ -40 ~ +85 Yes 113-381-20 Red Colour Diffused 5 13 20@13mA 627 -40 ~ +70 -40 ~ +85 Yes 113-382-20 Yellow Colour Diffused 5 13 15@13mA 590 -40 ~ +70 -40 ~ +85 Yes 113-383-20 Green Colour Diffused 5 11.5 [email protected] 565 -40 ~ +70 -40 ~ +85 Yes Vdc mA mcd nm 0 UNITS C C 0 = Make up of Order Code 113 - 314 - 04 SERIES OPTIONS 113 COLOUR VOLTAGE OPTIONS OPTIONS -314 -04 113 - (1 LED SEGMENT DEVICE) 114 - (2 LED SEGMENT DEVICE) 115 - (3 LED SEGMENT DEVICE) 116 - (4 LED SEGMENT DEVICE) 117 - (5 LED SEGMENT DEVICE) 118 - (6 LED SEGMENT DEVICE) For multi-array devices, replace initial 3 digits of part number to reflect the number of LED segment required * = Voltage DC for 20mA product is Vf@20mA, not Vopr 119 - (7 LED SEGMENT DEVICE) ^ = Products must be derated according to the derating information. 120 - (8 LED SEGMENT DEVICE) Each derating graph refers to specific LEDs. - Refer to page 3 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 057/07 Issue 2 SAMPLES AVAILABLE Page 1 of 3 113 Series 37 2.3 2.5 6.3 8.3 0.5Sq 5.0 5.0 7.3 4.6 1.0 2.08 2.54 5.0 Anode (Red Bi-colour) Dimensions in mm (Typical) Not to scale Housing Material Polycarbonate This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in the majority of automatic soldering processes. *Material test thickness 1.6mm LEDs LED Polarity Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign. Reverse Polarity This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in reverse colour configuration. Bi-colour 2 Pin Operation To acheive the second colour for a 2 pin Bi-colour unit the supply must be reversed, standard colour configuration for these units is red anode to the ‘+’ sign. Electro-static Discharge (ESD) Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensityproducts over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. We recommend all users of LED based products follow the guidelines of BS 100015. Note: All luminous intensity figures refer to the unmodified discrete LED. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 057/07 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 De-rating Information 305 & 311 314 330 113-120 Series Part numbers also available in the 113-120 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR (Vdc) Vopr VOLTAGE DC (Vdc) Vopr 113-305-04 Red 20mA 116-305-01 Red 2mA 113-305-04-50 Red 20mA 116-305-04 Red 20mA 113-305-04-52 Red 20mA 116-311-04 Yellow 20mA 113-305-13 Red 20mA RP 116-314-04 Green 20mA 113-311-01 Yellow 2mA 117-000-04-50 GRGRG 20mA 113-311-04-53 Yellow 20mA 117-000-04-52 RRYGG 20mA 113-311-13 Yellow 20mA RP 117-314-01 Green 2mA 113-314-01 Green 2mA 117-314-04 Green 20mA 113-314-01-24 Green 2mA 117-330-04 Red/Green Bi-colour 20mA 113-314-01-25 Green 2mA 118-000-04-50 YYRYYR 20mA 113-314-04-53 Green 20mA 118-000-04-52 RRRYGG 20mA 113-314-10 Green 2mA RP 118-305-01-1 Red 2mA 113-314-13 Green 20mA RP 118-305-04 Red 20mA 113-326-04 Blue 20mA 118-314-04 Green 20mA 113-330-01 Red/Green Bi-colour 2mA 118-330-04 Red/Green Bi-colour 20mA 113-336-04 Red 20mA 119-305-04 Red 20mA 113-931-04 Red 20mA 119-314-04 Green 20mA 114-000-01-51 RY 2mA 120-305-01 Red 2mA 114-311-01 Yellow 2mA 120-305-04 Red 20mA 115-000-01-50 RYG 2mA 120-314-01 Green 2mA 115-314-04 Green 20mA 120-314-04 Green 20mA 115-330-04 Red/Green Bi-colour 20mA 120-332-04 Green/Yellow Bi-colour 20mA 116-000-04-50 RGRG 20mA UNITS 116-000-04-54 GGRR 20mA 116-000-04-59 YRRR 20mA available to order. These products may have custom 116-000-04-60 GGYR 20mA modifications that alter their operation beyond the 116-000-13-50 RRRY RP 20mA RP generic information contained within this datasheet. VDC Please contact sales for further information. UNITS ** = Multi-colour options are verified as example: 117-000-04-50 VDC The products listed above illustrate all of the options How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 057/07 Issue 2 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3