FEATURES PANEL INDICATOR LEDs - Ø6.35mm Mounting 352 SERIES PACK QUANTITY = 20 PIECES l Snap-In l Supplied with 150mm flying lead terminations as l Sealed to IP40 l 352-535-04 can be used as a tri colour device l Product illustrated 352-535-04 standard SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 627 -40 ~ +85^ -40 ~ +85 λp Topr Tstg STANDARD INTENSITY 352-505-04 Red Colour Diffused 2.0* 20 60 Yes 352-511-04 Yellow Colour Diffused 2.1* 20 40 590 -40 ~ +85^ -40 ~ +85 Yes 352-514-04 Green Colour Diffused 2.2* 20 40 565 -40 ~ +85^ -40 ~ +85 Yes 352-535-04 Red/Green Colour Diffused 2.0/2.2* 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 352-581-20 Red Colour Diffused 5 13 50@13mA 627 -40 ~ +70^ -40 ~ +85 Yes 352-582-20 Yellow Colour Diffused 5 13 20@13mA 590 -40 ~ +70^ -40 ~ +85 Yes 352-583-20 Green Colour Diffused 5 11.5 [email protected] 565 -40 ~ +70^ -40 ~ +85 Yes STANDARD INTENSITY 352-501-04 Red Water Clear 1.85* 20 2700 660 -40 ~ +85^ -40 ~ +85 Yes 352-521-04 Yellow Water Clear 2.2* 20 6100 595 -40 ~ +85^ -40 ~ +100 Yes 352-532-04 Green Water Clear 3.5* 20 11600 525 -30 ~ +85^ -40 ~ +100 Yes 352-930-04 Blue Water Clear 3.6* 20 3460 470 -30 ~ +85^ -40 ~ +100 Yes 352-997-04 Cold White Water Clear 3.6* 20 7800 *see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm 0 UNITS 997 *Typical emission colour cold white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.360 0.318 C C 0 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS076/07 Issue 1 SAMPLES AVAILABLE Page 1 of 3 352 Series MOUNTING HOLE Dimensions in mm (Typical) Anode termination indicated by long tag. Not to scale Mounting hole to be clean an burr free MATERIALS Body Nylon 6 Panel Washer N/A Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip N/A Lens Epoxy Header PTFE TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM POWER PANEL REVERSE CUTOUT MINIMUM MOUNTING MIN/MAX. PANEL DISSIPATION VOLTAGE CENTRES THICKNESS 352 500 3 6.35 9.0 3.0 UNITS mW Vdc mm mm mm OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 13 DC Products Red-anode / Black-cathode 150mm 13 AC Products Brown-live / Blue-neutral 150mm 17 DC Products Red-anode / Black-cathode 1000mm 17 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 7/0.2mm 1.2mm OF OVER COMMENTS Customised lengths available PROTECTION DIODE ORDER CODE SUFFIX CIRCUIT COMMENTS 01 Available on all indicators except Bi-Colour devices and when diode test is specified. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 076/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 352 Series Part numbers also available in the 352 Series: PART NO. COLOUR 352-503-04 Red 352-503-04-15 352-503-04-50 VOLTAGE PART NO. COLOUR VOLTAGE 20mA 352-535-04-57 Red/Green/Amber 20mA Red 20mA 352-538-04-50 Red/Green/Amber 20mA Red 20mA 352-549-04 Green/Yellow 20mA 352-505-04-52 Red 20mA 352-581-20-15 Red 5/6Vdc 352-505-12-50 Red 24Vdc 352-581-20-52 Red 5/6Vdc 352-509-04 Yellow 20mA 352-582-20-15 Yellow 5/6Vdc 352-509-04-15 Yellow 20mA 352-582-20-50 Yellow 5/6Vdc 352-509-04-50 Yellow 20mA 352-582-20-51 Yellow 5/6Vdc 352-511-04-53 Yellow 20mA 352-583-20-15 Green 5/6Vdc 352-512-04 Green 20mA 352-583-20-50 Green 5/6Vdc 352-512-04-15 Green 20mA 352-583-20-54 Green 5/6Vdc 352-512-04-50 Green 20mA 352-583-20-55 Green 5/6Vdc 352-512-04-51 Green 20mA 352-584-21 Red 12Vdc 352-512-04-52 Green 20mA 352-584-21-50 Red 12Vdc 352-530-04 Red/Green 20mA 352-585-21 Yellow 12Vdc 352-535-04-15 Red/Green/Amber 20mA 352-585-21-50 Yellow 12Vdc 352-535-04-53 Red/Green/Amber 20mA 352-586-21 Green 12Vdc 352-535-04-54 Red/Green/Amber 20mA 352-586-21-50 Green 12Vdc 352-535-04-56 Red/Green/Amber 20mA 352-586-21-51 Green 12Vdc (Vdc) Vopr (Vdc) Vopr UNITS UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. De-rating Information 505, 511, 532, 930 & 997 514 521 532 501 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 076/07 Issue 1 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3