FEATURES PROFESSIONAL LED INDICATORS Ø8.1mm Mounting 524 SERIES PACK QUANTITY = 10 PIECES l Robust stainless steel housing l Low profile styling, sunlight readable LEDs l Sealed to IP67 l Wide viewing angle l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 524-501-21 Red Colour Diffused 12 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 524-521-21 Yellow Colour Diffused 12 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 524-532-21 Green Colour Diffused 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 524-930-21 Blue Colour Diffused 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 524-997-21 Cool White Colour Diffused 12 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes 524-501-23 Red Colour Diffused 24-28 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 524-521-23 Yellow Colour Diffused 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 524-532-23 Green Colour Diffused 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 524-930-23 Blue Colour Diffused 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 524-997-23 Cool White Colour Diffused 24-28 20 14000 see below -40 ~ +95^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 011/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 524 Series Mounting Hole Dimensions in mm (Typical) Anode termination indicated by red sleeve Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Stainless steel grade 303 Nut Stainless steel grade 303 Panel Seal Viton Termination Brass to BS 2874 CZ108 Copper flash undercoat with silver flash finish Lock Washer Stainless steel Fresnel lens Polycarbonate Encapsulation PC5430 resin 925-000-00 is brass tin plated. For use with 524 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 524 MAXIMUM MAXIMUM DISSIPATION VOLTAGE POWER PANEL REVERSE 825 1000 mW Vdc * = current version NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 8.1 0.65 x,y=14.5 1.5-13.0 mm Nm mm mm CUTOUT MOUNTING MOUNTING PANEL • = voltage version OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 011/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 532, 501 & 521 930 & 997 ALSO AVAILABLE Part numbers also available in the 524 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR (Vdc) Vopr 524-501-04 Red VOLTAGE DC (Vdc) Vopr 20mA 524-532-20 Green 5/6 VDC 524-501-04-15 Red 20mA 524-532-20-22 Green 5/6 VDC 524-501-20 Red 5/6 VDC 524-532-21-22 Green 12 VDC 524-501-20-22 Red 5/6 VDC 524-532-22 Green 24 VDC 524-501-21-15 Red 12 VDC 524-532-22-22 Green 24 VDC 524-501-22 Red 24 VDC 524-532-24 Green 48 VDC 524-501-22-22 Red 24 VDC 524-532-24-19 Green 48 VDC 524-501-24 Red 48 VDC 524-532-24-22 Green 48 VDC 524-501-25 Red 110 VDC 524-532-25 Green 110 VDC 110 VAC 524-501-75-15 Red 110 VAC 524-532-75-15 Green 524-501-76-15 Red 230 VAC 524-532-76-15 Green 230 VAC 524-501-86-19 Red 115 VAC 524-532-86 Green 115 VAC 524-512-04 Green 20mA 524-532-86-22 Green 115 VAC 524-512-21 Green 12 VDC 524-930-04 Blue 20mA 524-512-24 Green 48 VDC 524-930-04-15 Blue 20mA 524-512-86 Green 115 VAC 524-930-04-50 Blue 20mA 524-521-04 Yellow 20mA 524-930-21-15 Blue 12 VDC 524-521-04-15 Yellow 20mA 524-930-22 Blue 24 VDC 524-521-20 Yellow 5/6 VDC 524-930-24 Blue 48 VDC 524-521-20-22 Yellow 5/6 VDC 524-930-25 Blue 110 VDC 524-521-21-15 Yellow 12 VDC 524-997-04 White 20mA 524-521-22 Yellow 24 VDC 524-997-21-15 White 12 VDC 524-521-22-22 Yellow 24 VDC 524-997-22 White 24 VDC 524-521-24-22 Yellow 48 VDC 524-997-22-22 White 24 VDC 524-530-04-50 Red/Green 20mA 524-997-24 White 48 VDC 524-530-21-15 Red/Green 12 VDC 524-997-24-22 White 48 VDC 524-530-23 Red/Green 28 VDC 524-997-72 White 24 VAC 524-532-04 Green 20mA 524-997-86-22 White 115 VAC 524-532-04-15 Green 20mA UNITS UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 011/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3