FEATURES PROFESSIONAL LED INDICATORS Ø6.35mm Mounting 611 SERIES PACK QUANTITY = 10 PIECES l Black anodised aluminium housing l Internal reverse protection diode fitted as standard in all voltage models l Sealed to IP67 l Flying lead terminations available l Suitable for high vibration applications SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 611-301-21 Red Colour Diffused 12 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 611-325-21 Yellow Colour Diffused 12 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 611-324-21 Green Colour Diffused 12 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 611-934-21 Blue Colour Diffused 12 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 611-998-21 Cool White Colour Diffused 12 20 4600 see below -30 ~ +85^ -40 ~ +100 Yes 611-301-23 Red Colour Diffused 24-28 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 611-325-23 Yellow Colour Diffused 24-28 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 611-324-23 Green Colour Diffused 24-28 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 611-934-23 Blue Colour Diffused 24-28 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 611-998-23 Cool White Colour Diffused 24-28 20 4600 see below -30 ~ +85^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 041/06 Issue 2 SAMPLES AVAILABLE Page 1 of 3 611 Series Mounting Hole Dimensions in mm (Typical) Anode termination indicated by long pin. Not to scale Mounting hole to be clean and burr free MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Bright Nickel Plated Brass Panel Seal Viton Termination Tags Tin Plated Phosphor Bronze Fresnel lens Polycarbonate Encapsulation Epoxy Lock Washer 909-000-00 is gold plated. 910-000-00 is tin plated. For use with 611 series lamps. Spring Steel Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 611 MAXIMUM MAXIMUM DISSIPATION VOLTAGE 500 3* / 75• mW Vdc POWER * = Current Version REVERSE PANEL NUT MINIMUM MIN/MAX. TORQUE CENTRES THICKNESS 6.35 0.6 x,y = 11.0 1.5-7.0 mm Nm mm mm CUTOUT MOUNTING MOUNTING PANEL • = Voltage Version OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 041/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 325 301 324, 934 & 998 website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2007 : DS 041/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3