FEATURES PROFESSIONAL LED INDICATORS Ø25.4mm Mounting 671 SERIES PACK QUANTITY = 1 PIECE l Black anodised aluminium housing l RIA 12 approved versions available l Sealed to IP67 l Large LED indication l AC versions available upon request SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS WAVE INTENSITY LENGTH lv@20mA (mcd) λp (nm) OPERATING TEMP Topr STORAGE TEMP Tstg -40 ~ +85^ -40 ~ +85 STANDARD INTENSITY 671-290-22 671-291-22 671-294-22 671-290-75 671-291-75 Red Yellow Blue Red Yellow Colour Diffused 24 Colour Diffused 24 Colour Diffused 24 19 30 19 20 19 19 Colour Diffused 110vac/dc 19 20 Colour Diffused 110vac/dc 19 30 625 590 468 625 590 -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ -40 ~ +85 -40 ~ +85 -40 ~ +85 -40 ~ +85 Yes Yes Yes Yes Yes 671-294-75 Blue Colour Diffused 110vac/dc 10 19 468 -40 ~ +85^ -40 ~ +85 Yes 671-289-22 Red Colour Diffused 24 19 400 660 -40 ~ +85^ -40 ~ +85 Yes 671-292-22 Green Colour Diffused 24 19 200 565 -40 ~ +85^ -40 ~ +85 Yes 671-293-22 671-295-22 Yellow Cool White Colour Diffused 24 Colour Diffused 24 HIGH INTENSITY 19 820 19 890 590 -40 ~ +85^ -40 ~ +85 Yes 590 -40 ~ +85 Yes Red Colour Diffused 110vac/dc 10 400 660 -40 ~ +85^ 671-292-75 Green Colour Diffused 110vac/dc 10 200 565 -40 ~ +85^ 671-295-75 UNITS Yellow Cool White Colour Diffused 110vac/dc 10 820 Colour Diffused 110vac/dc 10 Vdc 890 mA mcd Yes *see below -40 ~ +85^ 671-289-75 671-293-75 -40 ~ +85 -40 ~ +85^ *see below -40 ~ +85^ nm °C -40 ~ +85 -40 ~ +85 -40 ~ +85 °C Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown - Refer to page 2. The -75 products will operate at 110Vac or 110DC. 295 x y *Typical emission colour cool white 0.248 0.391 0.380 0.280 0.286 0.436 0.381 0.284 Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 048/06 Issue 3 SAMPLES AVAILABLE Page 1 of 3 671 Series 49.0 Ø25.4 +0.02 0 Ø20.0 Ø34.5 18.0 + = Anode Mounting Hole Dimensions in mm (Typical) Not to scale Mounting hole to clean and burr free MATERIALS Body Black Anodised Aluminium Lens Epoxy Encapsulation PC5430 Resin Terminations Zinc Plated Steel Header Nylon 66 Panel Seal Neoprene Lock Washer Spring Steel Nut Aluminium TECHNICAL CHARACTERISTICS SERIES 671 UNITS MAXIMUM POWER DISSIPATION 2500 mw PANEL CUTOUT 25.4 mm NUT MOUNTING TORQUE 1.2 Nm MINIMUM MOUNTING CENTRES x,y = 41.0 mm MIN/MAX. PANEL THICKNESS 2.0-10.0 mm DERATING INFORMATION 289, 290, 291, 293, 294 & 295 292 website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 048/06 Issue 3 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 Part numbers also available in the 671 Series: PART NO. COLOUR 671-289-50 Red 671-289-75 671-289-76 671-289-87-50 Red Red Red VOLTAGE DC (Vdc) Vopr 125Vdc 110Vac 230Vac 130Vac/dc 671-289-98-50 Red 24Vac/dc 671-290-50 Red 125Vdc 671-290-26 671-290-75 671-290-76 671-291-26 671-291-50 671-291-75 671-291-76 671-291-99 671-292-50 671-292-75 671-292-76 671-292-87-50 Red Red Red Yellow Yellow Yellow Yellow Yellow Green Green Green Green 230Vdc 110Vac 230Vac 230Vdc 125Vdc 110Vac 230Vac 110Vac/dc 125Vc 110Vac 230Vac 130Vac/dc 671-292-98-50 Green 24Vac/dc 671-294-87-50 Blue 130Vac/dc 671-293-87-50 671-295-87-50 671-295-91-50 UNITS Yellow White White ALSO AVAILABLE 130Vac/dc 130Vac/dc 230Vac/dc The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 048/06 Issue 3 BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3