J2R0017-38-21 l OR D2211 REED SWITCH ORD2211 Lamp Load n GENERAL DESCRIPTION The ORD2211 is a single-contact reed switch designed for direct opening or closing lamps of 12 V - 3.4 W. The contacts are sealed within the glass tube with inert gas to maintain contact reliability. n FEATURES (1) Reed contacts are hermetically sealed within a glass tube with inert gas and do not receive any influence from the external atmospheric environment. (2) Quick response (3) The structure comprises the operating parts and electrical circuits arranged coaxially. Reed switches are suited to applications in radio frequency operation. (4) Reed switches are compact and light weight. (5) Superior corrosion resistance and wear resistance of the contacts assures stable switching operation and long life. (6) With a permanent magnet installed, reed switches economically and easily become proximity switches. n EXTERNAL DIMENSIONS (Unit: mm) f0.6 MAX f2.8 MAX 16.5 44.1±0.3 n APPLICATIONS l Automotive electronic devices l Control equipment l Communication equipment l Measurement equipment l Household appliances 79 l ORD2211 n ELECTRICAL CHARACTERISTICS Parameter Rated value Unit 20∼60 AT Pull-in Value (PI) 8min AT 100max mW 200min (PI≧20) VDC Drop-out Value (DO) Contact resistance (CR) Breakdown voltage Insulation resistance 109min W Electrostatic capacitance 0.3max pF 50 (12V-3.4W lamp) VA Maximum switching voltage DC 100（ ） AC V Maximum switching current 0.5 (Inrush 3A) A 2.5 A Contact rating Maximum carry current (1) Drop-out Value vs. Pull-in Value (2) Contact resistance (Measurement length: 32mm) 99.9 Cumulative frequency percent (%) Drop-out Value AT 50 40 30 20 10 0 10 20 30 Pull-in Value 80 40 50 60 99 95 90 80 70 60 50 40 30 20 10 5 1 0.1 AT 40 60 80 Contact resistance 100 mW ORD2211 l (3) Breakdown voltage (4) Insulation resistance （DC 100V） Cumulative frequency percent (%) 99.9 Breakdown voltage DC：V 400 300 200 100 0 10 20 30 40 50 Pull-in Value 60 AT 99 95 90 80 70 60 50 40 30 20 10 5 1 0.1 1010 1011 1012 1013 1014 W Insulation resistance (5) Electrostatic capacitance (1MHz) pF Electrostatic capacitance 0.4 0.3 0.2 0.1 0 10 20 30 40 Pull-in Value 50 60 AT 81 l ORD2211 n OPERATING CHARACTERISTICS Rated value Unit Operate time Parameter 0.6max ms Bounce time 0.4max ms Release time 0.05max ms 4600±500 Hz 500 Hz Resonant frequency Maximum operating frequency (1) Operate time (2) Bounce time (25Hz: 100AT energized) (25Hz: 100AT energized) 99.9 Cumulative frequency percent (%) ms 0.5 Operate time 0.4 0.3 0.2 0.1 99 95 90 80 70 60 50 40 30 20 10 5 1 0.1 0 10 20 30 40 50 Pull-in Value 0 60 AT 0.1 0.2 0.3 0.4 m s Bounce time (3) Release time (4) Resonant frequency Release time (25Hz: 100AT energized) ms 15 10 5 0 99 95 90 80 70 60 50 40 30 20 10 5 1 0.1 10 20 30 40 Drop-out Value 82 Cumulative frequency percent (%) 99.9 50 AT 4100 4600 5100 Resonant frequency Hz ORD2211 l n MECHANICAL CHARACTERISTICS (1) Lead tensile test (static load) (2) Lead tensile strength （2.27kg-10sec） 99.9 Cumulative frequency percent (%) Pull-in Value • Drop-out Value AT 60 50 40 PI 30 DO 20 10 99 95 90 80 70 60 50 40 30 20 10 5 1 0.1 0 2 4 Contact resistance 6 8 10kg Breaking load 0 mW 80 60 CR 40 Before test After test n ENVIRONMENTAL CHARACTERISTICS (1) Temperature characteristics ％ 40 CR Rate of change percent 30 20 DO 10 PI 0 −10 −20 −30 −40 −20 0 20 40 60 80 100 120 ℃ Temperature 83 l ORD2211 (2) Temperature cycle (3) Temperature and humidity cycle -10℃ to 65 ℃ 80% to 98% (-55℃ to 125 ℃) AT 60 Pull-in Value • Drop-out Value Pull-in Value • Drop-out Value AT 60 50 40 PI 30 20 DO 40 PI 30 20 DO 10 10 0 0 mW 80 mW 80 Contact resistance Contact resistance 50 60 CR 40 Before test 60 CR 40 After test Before test (4) High temperature storage test (5) Low temperature storage test (-40℃-500H) (+125℃-500H) AT 60 Pull-in Value • Drop-out Value Pull-in Value • Drop-out Value AT 60 50 40 PI 30 20 DO 40 PI 30 20 0 0 mW 80 mW 80 Contact resistance Contact resistance 50 DO 10 10 60 CR 40 Before test 84 After test After test 60 CR 40 Before test After test ORD2211 l (6) Shock test 1) Electrical characteristics 2) Misoperation area (open→close) (30G: 11ms) G 1500 50 40 PI Acceleration Pull-in Value • Drop-out Value AT 60 30 20 DO 1000 Misoperation area 10 500 Contact resistance 0 mW 80 60 0 CR 10 20 30 40 50 60 AT Pull-in Value 40 Before test After test (7) Vibration test (20G: 10∼1000Hz) Pull-in Value • Drop-out Value AT 60 50 40 PI 30 20 DO 10 Contact resistance 0 mW 80 60 CR 40 Before test After test 85 l ORD2211 n LIFE EXPECTANCY DATA: ORD2211 Load conditions Voltage: 13, 14, 16：VDC Current: 12V-3.4W Lamp Cumulative failure rate （%） 99.9 90 70 50 30 16V 14V 13V 10 5 1 0.1 0 2 3 5 7 104 57 105 23 23 57 106 23 57 107 57 106 23 57 107 Number of operations Load conditions Voltage: 50VDC Current: 1A Load: Resistive load Cumulative failure rate （%） 99.9 90 70 50 30 No failure 10 5 1 0.1 0 2 3 5 7 104 23 57 105 23 Number of operations * Arrow indicates number of operations where test was completed. Load conditions Voltage: 6VDC Current: 10mA, 50mA Load: Resistive load Cumulative failure rate （%） 99.9 90 70 50 30 No failure 50mA 10mA 10 5 1 0.1 0 2 3 5 7 106 2 3 5 7 107 2 3 Number of operations 86 5 7 108 2 3 5 7 109 * Arrow indicates number of operations where test was completed.