CTM-M-G Series DIRECTIONAL COUPLERS 0.5 to 18 GHz / Multi-Octave Bandwidths / 6, 10 & 20 dB Coupling / 50 W / Stripline / SMA / Rev. 08/16/99 PRINCIPAL SPECIFICATIONS Frequency Range, GHz Model Number Coupling¤, Frequency dB, Sensitivity, Nom. dB, Nom. Directivity, dB, Min. *Insertion Loss, dB, Max. VSWR Max. Outline Main Coupled Ref. Line Line Dim. CTM-6M-1.25G 0.5 - 2.0 CTM-10M-1.25G CTM-20M-1.25G 6 ±1.0 10 ±1.0 20 ±1.0 ± 0.75 ± 0.75 ± 0.75 23 23 23 0.35 0.35 0.35 1.20:1 1.20:1 1.20:1 1.20:1 1.20:1 1.20:1 1 2 2 CTM-6M-2.5G CTM-10M-2.5G CTM-20M-2.5G 1.0 - 4.0 6 ±1.0 10 ±1.0 20 ±1.0 ± 0.50 ± 0.50 ± 0.50 23 23 23 0.35 0.35 0.40 1.20:1 1.20:1 1.20:1 1.20:1 1.20:1 1.20:1 3 3 4 CTM-6M-5G CTM-10M-5G CTM-20M-5G 2.0 - 8.0 6 ±1.0 10 ±1.0 20 ±1.0 ± 0.30 ± 0.40 ± 0.40 20 20 20 0.50 0.35 0.40 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 1.25:1 5 5 6 CTM-6M-8G CTM-10M-8G CTM-20M-8G 4.0 - 12.4 6 ±1.0 10 ±1.0 20 ±1.0 ± 0.30 ± 0.40 ± 0.40 17 17 17 0.50 0.50 0.50 1.30:1 1.30:1 1.30:1 1.30:1 1.30:1 1.30:1 7 7 8 CTM-10M-12G CTM-20M-12G 7.0 - 18.0 6.0 - 18.0 10 ±1.25 20 ±1.25 ± 0.75 ± 0.60 15 15 0.60 0.60 1.35:1 1.40:1 1.35:1 1.40:1 9 9 ¤Coupling is referenced to the input * Insertion Loss above Coupling Loss POWER SPECIFICATIONS Coupled Power ‘‘Loss’’: GENERAL SPECIFICATIONS Impedance: 50 Ω nom. -- 55° to +85°C 6 dB units: 1.25 dB Operating Temp: 10 dB units: 0.46 dB SMA Connectors: Female, to meet the 20 dB units: 0.044 dB interface requirements Peak Power: 3 kW max. CW Input Power (Forward): 50 Watts max. Reflected Power: 6 dB units: 2 Watts max. 10 dB units: 5 Watts max. optionally available. 20 dB units: 50 Watts max. Inquire at factory. of MIL-C-39012 Other connectors: TNC and N type 16Aug99 For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531 CTM-M-G Series DIRECTIONAL COUPLERS 500 MHz to 18 GHz / Multi-Octave Bandwidths / 6, 10 & 20 dB Coupling / 50 W / Stripline / SMA Package Outline NOTES: 1. Tolerance on 3 place decimals ±.020(.51) except as noted. 2. Dimensions in inches over millimeters. 3. Weights are nominal on all outlines. General Notes: 1. The CTM series directional couplers are miniature three port devices utilizing stripline technology in a connectorized package. Each is a multi-section quarter wave coupler designed to cover a broad bandwidth. They are ideally suited to monitor forward or reflected power with minimal perturbation to the main line signal, signal sampling, control loops and test signal injection devices in BITE. 2. A variety of models may be custom ordered with coupling values up to 30 dB and covering frequency bands up to 18 GHz. 3. These units comply with MIL-C-15370 and may be supplied screened for compliance with additional specifications you designate for military and space applications requiring the highest reliability. 16Aug99 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldw ell,NJ,07006 / 973-575-1300 /FAX 973-575-0531