MERRIMAC DMG-4A-750

DOUBLEBALANCED MIXERS
DMG-A Series
10 to 1500 MHz / +7 to +17 dBmLO/ SMD Package
PRINCIPAL SPECIFICATIONS
Model
Number
RF/LO
Frequency,
MHz
IF
Frequency,
MHz
LO Drive,
dBm,
Nom.
Conversion Port Isolation, Typ. -1 dB
Input
Loss, dB,
L-R L-X R-X
Compr. Intercept
Max. Typ.
dB dB dB
Point
Point
DMG-2A-750
10 - 1500
DC - 1000
+7
10
7
35
20
15
DMG-4A-750
10 - 1500
DC - 1000
+13
10
8
35
20
15
0 dBm +12 dBm
(typ.)
(typ.)
+8 dBm +19 dBm
(typ.)
(typ.)
All specifications are as measured in a 50Ω system, at nominal LO power, in a down converter application.
A-Size
Surface Mount
Package
Outline
NOTES:
1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over millimeters.
3. All unmarked tabs are ground.
4. Max is largest dimension allowed.
5. Untrimmed lead length 0.25(6.35) nominal.
General Notes:
1. The DMG-A series of surface mount Double Balanced Mixers covers
the frequency range of 10 to 1500 MHz using miniature 4-diode rings
suitable for both general purpose and high performance applications.
2. The DMG-A SMD package is designed for 50 Ω coplanar systems
to insure satisfactory RF performance. The Kovar leads are supplied
untrimmed (unless otherwise specified) to allow mounting the package
in a variety of configurations.
3. Merrimac offers a broad selection of Double Balanced Mixers ideal
for a variety of signal processing functions from 20 kHz to 20 GHz.
4. Merrimac mixers comply with MIL-M-28837 and may be supplied
screened for compliance with additional specifications for military and
space applications requiring the highest reliability.
03May96
GENERAL SPECIFICATIONS
50 Ω nom.
Within ±1 dB of
Conversion Loss
Maximum Input Power: 300 mW @ 25°C
Impedance:
Noise Figure:
(derate linearly to 0 mW @ 125°C)
Usable LO Drive:
DMG-2A-750:
DMG-4A-750
Polarity Sense:
DC Offset Voltage:
Weight, nominal:
Operating Temperature:
For further information contact MERRIMAC/ 41 Fairfield Pl., West Caldwell, NJ, 07006 /
+7 to +10 dBm
+10 to +17 dBm
Positive
3 mV typ.
0.02 oz (0.5 g)
– 55° to +85°C
973-575-1300 / FAX 973-575-0531