ETC DML-2B-10G

DOUBLEBALANCED MIXER
DML-2B-10G
2 to 18 GHz / +7 to 10 dBmLO/ Low Conv. Loss / Wideband IF / Hermetic Pkg with Removable SMA
PRINCIPAL SPECIFICATIONS
RF/LO
LO Drive
IF
Conversion Isolation,
Model Frequency,
Range,
Range, Loss, SSB, dB, L-R, dB,
Number
GHz
dBm, Nom. GHz
Max. Typ.
Min. Typ.
DML-2B-10G 2 - 18
+7 to +10
DC - 1
DC - 2
8.5
9.0
5.5
6.5
20
40
Isolation,
L-X, dB,
Min. Typ.
18
30
Isolation,
R-X, dB,
Min. Typ.
18
30
VSWR
Typ.
LO
RF
2.0:1 2.0:1
All specifications are as measured in a 50Ω system, at nominal LO Power, in a down converter application.
Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over mm.
23Feb96
General Notes:
1. The DML-2B-10G Double Balanced Mixer covers the frequency
range of 2 to 18 GHz and is optimized for low loss and broad RF/LO
bandwidth. The hermetic removable SMA package is used for
performance testing and reliability.
2. Merrimac offers a broad selection of Double Balanced Mixers
ideal for a variety of signal processing functions from 20 kHz to 20
GHz and for applications from routine to very special.
3. All Merrimac mixers comply with MIL-M-28837 and may be
supplied screened for compliance with additional specifications for
military and space applications requiring the highest reliability.
GENERAL SPECIFICATIONS
Third Order Input Intercept: +13 dBm typ.
Noise Figure:
Within ±1 dB of
Conversion Loss
1 dB Compression Point: 0 dBm min.
(Referenced to Input)
1 dB Desensitization Point: – 2 dBm min.
(Referenced to Input)
Polarity Sense:
DC Offset Voltage:
Weight with SMA, nom:
Operating Temperature:
For further information contact MERRIMAC/ 41 Fairfield Pl., West Caldwell, NJ, 07006 /
Positive
5 mV typ.
0.7 oz (20 g)
– 55° to +85°C
973-575-1300 / FAX 973-575-0531