DOUBLE BALANCED M IXER DM M -6-1500 10 to 3000 M Hz/+10 to +17 dBm LO /SM A Connectors PRINCIPAL SPECIFICATIONS Model Number DMM-6-1500 RF/LO LO *IF Operating Frequency, Drive, Freq., Range, MHz Nom. MHz MHz 10 - 3000 +13 10 - 1000 10 - 500 dBm 500 - 1000 1000 - 3000 Conversion Port Isolation, Min. Loss, dB, L-R L-X R-X Max. Typ. dB dB dB 9.0 9.0 9.0 8.5 8.0 8.5 25 30 20 20 25 20 15 20 20 1 dB Input Compr. Intercept Point Point +7 dBm +19 dBm (typ.) (typ.) *IF Response extends to DC with increased conversion loss. All specifications are as measured in a 50Ω system, at nominal LO power, in a downconverter application Package Outline GENERAL SPECIFICATIONS Impedance: 50 Ω nom. Polarity Sense: Negative Noise Figure: Within ±1 dB of Conversion Loss Useful LO Drive: +10 to +17 dBm Maximum Input Power: 600 mW @25°C (derate linearly to 0 mW @125°C) NOTES: 1. Tolerance on 3 place decimals ±.020(.51) except as noted. 2. Dimensions in inches over millimeters. 1 dB Desens. Level: +5 dBm typ. DC Offset Voltage: 8 mV typ. Weight, nominal: 1.5 oz (42 g) Operating Temperature: – 55° to +85°C General Notes: 1. The DMM-6-1500 Double Balanced Mixers covers the frequency range of 10 to 3000 MHz using two parallel ring modulators to produce a medium level mixer with and extremely wide bandwidth. 2. Merrimac offers a broad selection of Double Balanced Mixers ideal for a variety of signal processing functions with frequencies ranging from 20 kHz to 20 GHz and for applications from routine to very special. 3. Merrimac mixers comply with MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space specifications requiring the highest reliability. 24May96 ForfurtherinformationcontactM ERRIM AC /41 Fairfield Pl.,W estCaldwell,NJ,07006 / 973-575-1300 /FAX 973-575-0531