MERRIMAC DML-6B-10G

TRIPLEBALANCED MIXER
DML-6B-10G
2 to 18 GHz / +10 to +13 dBmLO/ Low Conv.Loss / Wideband IF / Hermetic Pkg with Removable SMA
PRINCIPAL SPECIFICATIONS
RF/LO
LO Drive
IF
Model Frequency, Range, Range,
Number
GHz
dBm, Nom. GHz
DML-6B-10G
2 - 18
+10 to+ 13 0.5 - 8
1-6
Conversion
Isolation, Isolation, Isolation,
VSWR,
Loss, SSB, dB,
L-R, dB,
L-X, dB,
R-X, dB,
Typ.
Max. Typ.
Min. Typ. Min.
Typ. Min. Typ. LO RF
10.5
9.5
7.5
6.5
20
30
20
30
20
30
2.0:1 2.0:1
All specifications are as measured in a 50Ω system, at nominal LO Power, in a down converter application.
Package Outline
NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted.
2. Dimensions in inches over mm.
General Notes:
1. The DML-6B-10G Triple Balanced Mixer covers the frequency range
of 2 to 18 GHz and is optimized for wide IF bandwidth, low loss and
broad RF/LO bandwidth. The hermetic removable SMA package is
used for performance testing and reliability.
GENERAL SPECIFICATIONS
Third Order Input Intercept: +15 dBm typ.
Noise Figure:
Within ±1 dB of
Conversion Loss
1 dB Compression Point: +8 dBm typ.
2. Merrimac offers a broad selection of Balanced Mixers ideal for a
variety of signal processing functions from 20 kHz to 20 GHz and for
applications ranging from routine to very special.
1 dB Desensitization Point: +7 dBm typ.
3. All Merrimac mixers comply with MIL-M-28837 and may be supplied
screened for compliance with additional specifications for military and
space applications requiring the highest reliability.
(Referenced to Input)
(Referenced to Input)
Polarity Sense:
DC Offset Voltage:
Weight with SMA, nom:
Operating Temperature:
Positive
5 - 15 mV typ.
0.7 oz (20 g)
– 55° to +85°C
14Oct02
For further information contact MERRIMAC/ 41 Fairfield Pl., West Caldwell, NJ, 07006 /
973-575-1300 / FAX 973-575-0531