IAM-01 Series BROADBAND ACTIVE ISOLATORS 10 to 500 MHz / Meets MIL-E-5400R Class 2 Environmental Requirements / SMA Connectors PRINCIPAL SPECIFICATIONS GENERAL SPECIFICATIONS Model Number Frequency Limits, MHz DC Supply Power, Nom. IAM-01-75 IAM-01-200 IAM-01-250 10 - 150 10 - 400 10 - 500 +28V @ 75 mA +28V @ 75 mA +15V @ 75 mA Package Outline Reverse Isolation: 10 - 100 MHz 40 dB min. 100 - 300 MHz 30 dB min. 300 - 500 MHz 23 dB min. Impedance: 50 Ω nom. VSWR: Input 1.65:1 max. Output 1.50:1 max. Insertion Loss/Gain : 0 ± 1 dB (mid-band) Flatness: ± 1 dB Power Input, 1 dB Comp: +15 dBm min. Input Intercept Points: 3rd Order: +26 dBm typ. 2nd Order: +30 dBm typ. DC Supply Connections: Terminal: Solder Pin Ground: Solder Lug Weight, nominal: 3 oz. (86 g) Operating Temp: -- 55° to +71°C Typical Performance of Model IAM-01-200 NOTES: 1. Tolerance on 3 place decimals ± .020(.51) except as noted. 2. Dimensions in inches over millimeters. General Notes: 1. Merrimac’s IAM series consists of broadband, nontuned, nonreciprocal networks realized in solid state devices. They are intended for applications from HF through UHF and are ideally suited for isolating signal sources from mismatched or ‘‘swinging’’ loads. 2. Versions to cover specific frequencies with higher isolation or tighter tolerances are available as options. 13Mar96 For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531