MERRIMAC PDML-60-500

0 POWER DIVIDERS / COMBINERS
PDML-60 Series
1 to 1000 MHz / 6-Way / Low Insertion Loss / Lumped Element / Wideband / Low Profile Pkg / SMA
PRINCIPAL SPECIFICATIONS
Model
Number
Frequency
Range,
MHz
PDML-60-150
1 - 200
200 - 300
50 - 1000
PDML-60-500
Isolation,
dB,
Min.
Typ.
25
20
20
30
25
25
Amplitude
Balance, dB,
Max. Typ.
0.4
0.4
0.6
Package Outline
0.2
0.2
0.3
Phase
Balance
Max. Typ.
4°
4°
8°
2°
2°
3°
Insertion
Loss, dB,
Max. Typ.
1.5
1.5
2.5
1.0
1.0
1.5
VSWR
In/Out
Max. Typ.
1.3:1
1.3:1
1.5:1
1.2:1
1.2:1
1.2:1
GENERAL SPECIFICATIONS
Coupling:
Impedance:
CW Input Power:
-- 7.8 dB nom.
50 Ω nom.
2 W max.
(When used as divider with 1.2:1 VSWRout)
Internal Load Dissipation:
Weight, nominal:
Operating Temperature:
250 mW max.
2 oz. (57 g)
-- 55° to +85°C
General Notes:
1. The PDML-60 series of 6-way, low profile,
in-line Power Dividers/Combiners covers 1
to 1000 MHz using lumped element design
for broad bandwidth and high performance.
2. Other Power Dividers/Combiners are
available for frequencies from 10 kHz to 26
GHz with output port quantity from two to
sixteen and with power handling capacity
ranging up to several kilowatts. Each divider
is designed using the most appropriate technology for the application such stripline, microstrip, lumped element or a combination.
NOTES:
1. Tolerance on 3 place decimals ±.030(.76) except as noted.
2. Dimensions in inches over millimeters.
29Apr96
For further information contact MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531