INTERCONNECTS .100” Grid (.030” dia.) Pins, Solderless Press-Fit Single Row Series 800, 801 • The unique compliant tail pins conform to .040”+.003” finished hole without stressing inner layers. Patent No. 4,799,904 • Series 800 pin headers are offered in two tail lengths for .060”-.100” (MM #5601) and .090”-.130” (MM #5602) thick panels. See page 187 for details. • Series 801 sockets MM #4614 or #4615 use Hi-Rel, 6-finger BeCu #47 contacts rated at 4.5 amps. Receptacles accept .030” diameter pins & .025” square pins. See page 221 for details. Fig. 1 RoHS 2002/95/EC • Insulators are high temp. thermoplastic. Ordering Information Compliant Tail Pin Header for .060 - .100” thick boards Fig. 1 800-XX-0 _ _-61-001000 Specify # of pins 01-64 Compliant Tail Pin Header for .090 - .130” thick boards Fig. 2 Fig. 2 800-XX-0 _ _-62-001000 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 01-64 For RoHS compliance select plating code. XX=Plating Code See Below SPECIFY PLATING CODE XX= 10 10μ” Au Pin Plating 90 40 200μ” Sn/Pb 200μ” Sn Compliant Tail Socket for .060 - .100” thick boards Fig. 3 801-XX-0 _ _-61-001000 Fig. 3 Specify # of pins 01-50 Compliant Tail Socket for .090 - .130” thick boards Fig. 4 801-XX-0 _ _-62-001000 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 SPECIFY PLATING CODE XX= Fig. 4 w w w. m i l l - m a x . c o m For RoHS compliance select plating code. XX=Plating Code See Below 13 Sleeve (Pin) 10µ” Au Contact (Clip) 30µ” Au 83 01-50 91 93 41 99 43 44 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn 516-922-6000