INTERCONNECTS 2mm Grid Surface Mount Headers And Sockets Single and Double Row Left Hand Footprint Series 830, 831 832, 833 • Headers (830 & 832) use MM# 6218 pins. See page 175 for details. Right Hand Footprint Coplanarity .005”. For Pin Counts > 12 Consult Tech Support Fig. 1 Footprint • Sockets (831 & 833) use MM# 1802 receptacles and accept pin diameters from .015-.025. See page 140 for details. RoHS 2002/95/EC • Coplanarity .005” (Single Row max 12 pins; Double Row max 24 pins) for higher pin counts contact technical support. • Insulators are high temp. thermoplastic. For RoHS compliance select plating code. Ordering Information XX=Plating Code See Below Single Row Header, Left Hand Footprint Odd or Even # of pins Fig. 1L Coplanarity .005”. For Pin Counts > 24 Consult Tech Support Fig. 2 Left Hand Footprint Fig. 1R 830-XX-0_ _-30-001000 Specify # of pins 01-50 Single Row Header, Right Hand Footprint Even # of pins 830-XX-0_ _-30-002000 Specify even # of pins 02-50 Double Row Header, Even # of pins 832-XX-_ _ _-30-001000 Fig. 2 Specify even # of pins Right Hand Footprint SPECIFY PLATING CODE XX= 004-100 10 40 90 10μ” Au 200μ” Sn/Pb 200μ” Sn Pin Plating Single Row Socket, Left Hand Footprint Odd or Even # of pins Coplanarity .005”. For Pin Counts > 12 Consult Tech Support Fig. 3 Fig. 3L Footprint Fig. 3R 831-XX-0_ _-30-001000 Specify # of pins 01-50 Single Row Socket, Right Hand Footprint Even # of pins 831-XX-0_ _-30-002000 Specify even # of pins 02-50 Double Row Socket, Even # of pins 833-XX-_ _ _-30-001000 Fig. 4 Specify even # of pins Coplanarity .005”. For Pin Counts > 24 Consult Tech Support Fig. 4 w w w. m i l l - m a x . c o m For Electrical, Mechanical & Enviromental Data, See pg. 4 SPECIFY PLATING CODE XX= 13 93 004-100 99 43 44 Sleeve (Pin) 10µ” Au 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn Contact (Clip) 30µ” Au 71 30µ” Au 200µ”Sn/Pb 30µ” Au 200µ”Sn 516-922-6000