MOFH and MOFZ Series / 14 Pin DIP OCXO ¾ Oven Controlled Oscillator ¾ 1.0 MHz to 150.0 MHz Available ¾ 14-pin DIP Package ¾ -40°C to 85° Available ¾ ±50ppb to ±500ppb PART NUMBERING GUIDE: MOF H 5 S 100 B Operating Temperature A = 0ºC to 50ºC B = -10ºC to 60ºC C = -20ºC to 70ºC D = -30ºC to 70ºC E = -30ºC to 80ºC F = -40ºC to 85ºC G = 0ºC to 70ºC Output Type H = HCMOS Z = Sinewave Supply Voltage 3 = 3.3 Volt 5 = 5 Volt 12 = 12 Volt Crystal Cut* Blank = AT Cut S = SC Cut Frequency Frequency Stability 050 = ±50ppb 100 = ±100ppb 250 = ±250ppb 500 = ±500ppb *Specific Stabilites/ Temperatures requires an SC Cut Crystal ELECTRICAL SPECIFICATIONS: Frequency Range 1.0 MHz to 150.0MHz Frequency Stability ±50ppb to ±500ppb Operating Temperature -40°C to 85°C max* * All stabilities not available, please consult MMD for availablity. Storage Temperature -40°C to 95°C Sinewave ±3 dBm 50Ω Output 10% Vdd max HCMOS 30pF 90% Vdd min Supply Voltage (Vdd) 3.3V 5V 12V typ 220mA 200mA 80mA Supply Current max 550mA 400mA 150mA Warm-up Time 3min. @ 25°C Input Impedance 100K Ohms typical Crystal AT or SC Cut options Phase Noise @ 10MHZ SC AT 10 Hz Offset -100dBc -92dBc 100 Hz Offset -127dBc -118dBc 1000 Hz Offset -140dBc -135dBc Voltage Control 0 to VCC ±3ppm typ ±10ppm typ Aging (after 30 days) ±0.5ppm/yr. ±1.5ppm/yr. MECHANICAL DETAILS: Pin Connections Pin 1 = Vc Pin 7 = Ground Pin 8 = Output Pin 14 = Supply Voltage MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomponents.com [email protected] Specifications subject to change without notice Revision: MOF091009H