ACTIVE SIGNAL AMPLIFIER Vin&Vout T55/56/65/66_D/S DESCRIPTION PRODUCT PROGRAM The series is a high integration, high Isolation Power Channels Output Part Number Power Supply Input Output amplifier module, with anterior circuit voltage T5530D/S 24V 0-10V 0-10V NONE 1 signal input and posterior voltage signal output. T5533D/S 24V 0-10V 0-10V 24V 1 T5630D/S 24V 0-10V 0-5V NONE 1 efficiency polygonal–line active isolation These modules are embed with a high efficiency isolated micro-power source, which T6530D/S 24V 0-5V 0-10V NONE 1 the two-wire three-wire and four-wire circuit T6630D/S 24V 0-5V 0-5V NONE 1 applications, our products largely predigest T6650D/S 12V 0-5V 0-5V NONE 1 can provide a electrics-feed for signal input .In customers’ design helpfully improve the using Note: We could also offer customer design for special input and output. room ratio of PCB .Adopting electromagnetism isolation technology, it is available to keep high accuracy and natural extrem ely low ELECTRICAL CHARACTERISTICS temperature drift. The isolation voltage among the input, output, power supply and isolated Power Supply Data power output can up to 2.5KVDC. Isolation Power Output Data FEATURES ● Three-port isolation（Among input, output and Input Data power supply） ● High accuracy (0.1% F.S.) ● High linearity (0.1% F.S.) Output Data ● Isolation voltage(2500VDC/60S) Power Supply (Nominal Power Supply) ±5% Power Dissipation ≤2W Power Protection Reverse protection Output Voltage (Nominal) ±10% Output Current ≤25mA Input Signal See above Input Impedance ≥10MΩ Overload ≤30V Output Signal See above Load ＞1KΩ(At output=max) ● High frequency response(15KHz) ● Extremely low temperature(35PPM/ ℃) TRANSMISSION CHARACTERISTICS ● Industry standard(Operating Temperature Offset Range:-25°C to 71°C) ● High reliability(MTBF＞500,000 hours) 0.1%F.S. Gain Error 0.1%F.S. Temperature Drift 0.0035%F.S./℃(-25℃ to +71℃) ISOLATION CHARACTERISTICS MODEL SELECTION TXXXXD Package style Isolation power output Power supply Output Input Isolation amplifier Galvanic Isolation Three-port isolation（Among input, output and power supply） Isolation Voltage 2.5KVDC (Tested for 1minute and 1mA max, humidity<70%) Insulation Resistance 1000MΩ, 500VDC(Among signal input ,signal output and power supply) OTHER CHARACTERISTICS Ambient temperature Operation temperature:-25°C to +71°C Package DIP24/SOIC24 Weight About 10g The Environment in use No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded Transport and Storage temperature:-50°C to +105°C MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Note: 1. All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, specifications of custom product may be different. Please contact our service people directly for certain conditions. The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T55/56/65/66_D/S A/2-2008 Page 1 of 2 SCHEMATIC DIAGRAM APPLICATION NOTE 1. Please read instruction book carefully before 24Power supply 23+ using the product. If you have any question, please contact with our technical support. 13Is olatio n Power O utput 14+ 2. Please don’t install in the dangerous zone. 3. The power supply is direct voltage. 220V alternating current is forbidden.. Vout+ Vin12Signal input 11+ Vin+ 3+ Signal ou tput Vout- 4. Don’t divide the product privately in case the equipments ineffective or go wrong. 1- AFTER SERVICE 1. Products are carefully inspected and controlled APPLICATION CIRCUIT DIAGRAM before going out from our factory. If they operated abnormally or there were something Power Supply wrong in the inner parts, please contact with our Isolation Power Output agents near you or technical support in our 16 15 14 13 PinPin+ NC NC NC NC NC PoutPout+ company as soon as possible. 24 23 22 21 20 2. 3 years warranty since the delivery date. During the period of SoutNC Sout+ NC NC NC NC Sin + Sin - TxxxxD 1 2 3 4 5 9 10 11 12 has any quality problem in the process of normally using. APPLICATION CIRCUITS Input Output quality guarantee，our company will repair or change free of charge if product See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. PACKAGING SIZE AND TERMINAL DESCRIPTION First Angle Projection DIP Package 4.00 (0.157) 0.70 (0.028) 32.30(1.272) 14.40 (0.560) 14.40 (0.560) 18.60 (0.732) 32.30(1.272) 27.94 (1.100) 0.30 (0.012) RECOMMENDED FOOTPRINT Top view,grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) 1.15±0.15 (0.045±0.006) 24 23 22 21 20 16 15 14 13 24 23 22 21 20 16 15 14 13 Vin- 2.00 0.079 Vin- 19.24 (0.757) 0.65 (0.026) 10.20 (0.397) 10.20 (0.397) SOIC Package 9 1011 12 1 2 3 4 5 1 2 3 4 5 9 10 11 12 1.00 0.039 Pin Connection FUNCTION PIN PIN Output- FUNCTION Isolation Power Output+ Output+ Input+ Power Supply+ 24(Vin-) Power Supply- Others NC Isolation Power OutputNC:No Connection Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances:±0.10mm(± 0.004inch) General tolerances :±0.25mm(± 0.010inch) The copyright and authority for the interpretation of the products are reserved by Mornsun Specifications subject to change without notice. T55/56/65/66_D/S A/2-2008 Page 2 of 2