Specification Number SGE2668-1G Revision. A (051106) ® TM 2.4W LMT2608 80.0:1 Transformer DESCRIPTION This document describes and specifies the electrical and mechanical characteristics of the SGE2668-1G high voltage transformer for CCFL inverter power supplies. SGE2668-1G is the RoHS compliant and Lead free transformer. For Reliability and Safety Specification, refer to SGE2606-4. WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS Inductance (@ 10Khz, 0.1V) Items Min Nom Max L1-2,L2-3 (µH) 22 29 37 L4-5 (mH) 300 433 547 Inductance (@ 100KHz, 1V), with Short pin4-5 LLKG1-2, LLKG2-3 (µH) 6.2 6.7 7.4 LLKG4-5 (mH) NA NA NA Rating Note: Max output power varies depend on operating condition. Max Open Output Voltage 1500VRMS , 3sec. Max Output Voltage 1000VRMS Max Output Power 2.4W DC. Resistance Min Nom Max RDC1-2, RDC2-3(mΩ) 100 118 128 RDC4-5 (Ω) 470 493 560 R1-2/R2-3 0.96 1 1.04 30 50 Quality Factor Q1-3 Quality Factor Q4-5 NA NA NA Dielectric Voltage Withstand 60Hz, Arc-detect enabled, 5 sec. min. 200µA max. leakage current Secondary to Core 1500VRMS min. ( 1min) Primary to Core 750VRMS min. Primary to Secondary 1000VRMS min. Items WINDING SPECIFICATIONS Primary Winding Sequence Wire Size & Type Number of Turns Winding Method Pin 1 – 2 1S – 2F 0.18φ, Single Insulation, 180°C 13 Pin 2 – 3 2S – 3F 0.18φ, Single Insulation, 180°C 13 Secondary Pin 4 – 5 5S – 4F 0.03φ, Triple Insulation, 180°C 1600 Bifilar PHYSICAL SPECIFICATIONS & WIRING DIAGRAM SGE2668-1G PART MARKING SGE - G XYZD A – SGE2668-1G: MSC PN, PYMDD A: P: Plant Code, Y=Year, M:Month, DD:date A: Rev.# PACKAGING SPEC AND ORDER INFORMATION Packaging Order Information – SGE2668-1GTR (Tape and Reel ) TAPE & REEL : Refer to SGE2604-4 specification Copyright © 2004 Rev. A, 2006-05-11 Microsemi Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1 Specification Number SGE2668-1G Revision. A (051106) TM ® 2.4W LMT2608 80.0:1 Transformer NOTES WWW . Microsemi .C OM NOTES PRODUCTION DATA – Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time. Copyright © 2004 Rev. A, 2006-05-11 Microsemi Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 2