THYRISTOR MODULE P F T 1 3 0 3 N 130A / 300V to 600V P F T 1 3 0 6 N OUTLINE DRAWING FEATURES * 3 Phase Anode Common Half Bridge Circuit * High Surge Capability * UL Recognized, File No. E187184 TYPICAL APPLICATIONS * Rectified For General Use φ φ Maximum Ratings Parameter Repetitive Peak Off-State Voltage Non Repetitive Peak Off-State Voltage Repetitive Peak Reverse Voltage Non Repetitive Peak Reverse Voltage Approx Net Weight:140g Symbol VDRM VDSM VRRM VRSM Parameter IO(AV) RMS On-State Current IT(RMS) I Squared t Peak Gate Power Average Gate Power Peak Gate Current Peak Gate Voltage Peak Gate Reverse Voltage Operating JunctionTemperature Range Storage Temperature Range Case mounting Mounting torque Terminals Value per 1 Arm PFT1306N 300 400 300 400 600 700 600 700 Conditions Average Rectified Output Current Surge On-State Current Grade PFT1303N ITSM I2t PGM PG(AV) IGM VGM VRGM Tjw Tstg Ftor 50Hz Half Sine Wave condition Tc=100°C 50 Hz Half Sine Wave,1Pulse, Non-Repetitive 2msec to 10msec Greased M5 Screw M6 Screw Unit V V Max Rated Value Unit 130 A 204 A 2250 A 25300 A2s 5 W 1 W 2 A 10 V 5 V -40 to +150 °C -40 to +125 °C 2.4 to 2.8 N •m 2.5 to 3.5 Electrical • Thermal Characteristics Characteristics Peak Off-State Current Peak Reverse Current Peak Forward Voltage Gate Current to Trigger Gate Voltage to Trigger Gate Non-Trigger Voltage Latching Current Holding Current Thermal Resistance *1 Value Per 1Arm *1:Value Per Module Symbol IDM IRM VTM Test Conditions VDM= VDRM, Tj= 150°C VRM= VRRM, Tj= 150°C ITM= 390A, Tj=25°C Tj=-40°C IGT VD=6V,IT=1A Tj=25°C Tj=125°C Tj=-40°C VGT VD=6V,IT=1A Tj=25°C Tj=125°C VGD VD=2/3VDRM Tj=125°C IL Tj=25°C IH Tj=25°C Rth(j-c) Junction to Case Maximum Value. Min. Typ. Max. 10 10 1.28 200 100 50 4 2.5 1.5 0.2 80 50 0.09 Unit mA mA V mA V V mA mA °C/W PFT130xN OUTLINE DRAWING (Dimensions in mm) φ φ