NJG1662MD7 X-SPDT SWITCH GaAs MMIC ! GENERAL DESCRIPTION The NJG1662MD7 is a GaAs X (cross) - SPDT switch MMIC, which is designed for switching of balanced dual band filters. The NJG1662MD7 features very low phase error between on-state paths, low insertion loss, low control voltage and wide frequency coverage. The ESD protection circuit are integrated in the IC to achieve high ESD tolerance. The ultra-small and ultra-thin EQFN14-D7 package is adopted. ! PACKAGE OUTLINE NJG1662MD7 *) X-SPDT is a paired SPDT switch controlled synchronously. The X-SPDT includes two SPDT switches whose RF lines have a crossing inside the chip. ! FEATURES " Low phase error " Low operation voltage " Low control voltage " Low insertion loss " High isolation " Small and thin package ±3 deg @f=2.0GHz VDD=+1.5~+4.5V VCTL(H)=+1.3V min. 0.3dB typ. @f=1.0GHz, PIN=0dBm 0.4dB typ. @f=2.0GHz, PIN=0dBm 28dB typ. @f=1.0GHz, PIN=0dBm 22dB typ. @f=2.0GHz, PIN=0dBm EQFN14-D7 (Package size: 1.6x1.6x0.397mm typ., Lead and Halogen-Free) ! PIN CONFIGURATION (Top View) 11 10 9 8 12 7 13 6 14 5 1 2 3 Pin connection 1. GND 2. PA2 3. PB1 4. GND 5. PB2 6. GND 7. VDD 8. GND 9. PC2 10. PC1 11. GND 12. VCTL 13. GND 14. PA1 4 ! TRUTH TABLE “H”=VCTL(H), “L”=VCTL(L) ON PATH VCTL PC1-PA1,PC2-PA2 H PC1-PB1,PC2-PB2 L NOTE: The Information on this datasheet will be subject to change without notice. Ver.2008-11-14 -1- NJG1662MD7 ! ABSOLUTE MAXIMUM RATINGS (Ta=+25°C, Zs=Zl=50Ω) PARAMETER SYMBOL CONDITIONS RATINGS UNITS RF input power PIN VDD =2.7V, VCTL=0V/1.8V PC1,PC2,PA1,PA2,PB1,PB2 28 dBm Supply voltage VDD VDD terminal 5.0 V Control voltage VCTL VCTL terminal 5.0 V 1300 mW Power dissipation PD On PCB Operating temp. Topr -40~+85 °C Storage temp. Tstg -55~+150 °C ! ELECTRICAL CHARACTERISTICS (General conditions: Ta=+25°C, Zs=Zl=50Ω, VDD=2.7V, VCTL(L)=0V, VCTL(H)=1.8V, with application circuit) PARAMETERS SYMBOL Supply voltage VDD Operating current IDD CONDITIONS PIN=0dBm MIN TYP MAX UNITS 1.5 2.7 4.5 V - 16 30 μA Control voltage (LOW) VCTL(L) 0 - 0.4 V Control voltage (HIGH) VCTL(H) 1.3 1.8 VDD V Control current ICTL f=2GHz, PIN=0dBm - 5 10 μA Insertion loss 1 LOSS1 f=1GHz, PIN=0dBm - 0.3 0.45 dB Insertion loss 2 LOSS2 f=2GHz, PIN=0dBm - 0.4 0.55 dB 26 28 - dB 20 22 - dB 18 20 - dB PC1-PC2 port f=2GHz, PIN=0dBm 26 28 - dB f=2GHz, between on paths -3 0 3 deg 20 24 - dBm Isolation 1 ISL1 Isolation 2 ISL2 Isolation 3 ISL3 Isolation 4 ISL4 Phase error PE PC1-PA1, PC2-PA2 PC1-PB1, PC2-PB2 f=1GHz, PIN=0dBm PC1-PA1, PC2-PA2 PC1-PB1, PC2-PB2 f=2GHz, PIN=0dBm PC1-PA1, PC2-PA2 PC1-PB1, PC2-PB2 f=2.5GHz, PIN=0dBm Input power at 0.2dB compression point P-0.2dB f=2GHz VSWR VSWR f=2GHz, On port - 1.2 1.3 50% CTL to 10%/90% RF - 1.5 5.0 Switching time -2- TSW μs NJG1662MD7 ! TERMINAL INFORMATION No. SYMBOL DESCRIPTION 1 GND Ground terminal. Please connect this terminal with ground plane as close as possible for good RF performance. 2 PA2 3 PB1 4 GND Ground terminal. Please connect this terminal with ground plane as close as possible for good RF performance. 5 PB2 This port is connected to PC2 terminal by applying Low-level (0~0.4V) at VCTL terminal. An external capacitor is required to block DC voltage of internal circuit. 6 GND Ground terminal. Please connect this terminal with ground plane as close as possible for good RF performance. 7 VDD A supply voltage terminal (1.5~4.5V). Please place a bypass capacitor between this terminal and GND for avoiding RF noise from outside. 8 GND Ground terminal. Please connect this terminal with ground plane as close as possible for good RF performance. 9 PC2 Common RF port. This port is connected with either of PA2 or PB2. An external capacitor is required to block DC voltage of internal circuit. 10 PC1 Common RF port. This port is connected with either of PA1 or PB1. An external capacitor is required to block DC voltage of internal circuit. 11 GND Ground terminal. Please connect this terminal with ground plane as close as possible for good RF performance. 12 VCTL Control signal input terminal. This terminal is set to high-level (1.3V~4.5V) or low-level (0~0.4V). 13 GND Ground terminal. Please connect this terminal with ground plane as close as possible for good RF performance. PA1 This port is connected to PC1 terminal by applying High-level (1.3~4.5V) at VCTL terminal. An external capacitor is required to block DC voltage of internal circuit. 14 This port is connected to PC2 terminal by applying High-level (1.3~4.5V) VCTL terminal. An external capacitor is required to block DC voltage internal circuit. This port is connected to PC1 terminal by applying Low-level (0~0.4V) VCTL terminal. An external capacitor is required to block DC voltage internal circuit. -3- at of at of NJG1662MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Insertion Loss vs. Frequency Insertion Loss vs. Frequency ( V =2.7V, V DD 0.0 ( V =2.7V, V =1.8V ) CTL DD 0.0 =0V ) CTL PC1-PB1 PC2-PB2 -0.2 Insertion Loss (dB) Insertion Loss (dB) PC1-PA1 PC2-PA2 -0.4 -0.6 -0.8 -1.0 0.5 1.0 1.5 2.0 2.5 -0.2 -0.4 -0.6 -0.8 -1.0 0.5 3.0 1.0 VSWR vs. Frequency 2.0 1.5 2.0 2.5 Isolation vs. Frequency ( VDD=2.7V, VCTL1=1.8V ) ( V =2.7V, V DD 0 =1.8V ) CTL PC1 Port PC2 Port PC1-PB1 PC2-PB2 PC1-PC2 -10 Isolation (dB) VSWR 1.8 1.6 1.4 1.2 1.0 0.5 -20 -30 -40 1.0 1.5 2.0 2.5 -50 0.5 3.0 1.0 Frequency (GHz) ( V =2.7V, V DD 4 ( V =2.7V, V =1.8V ) CTL DD 4 2.5 3.0 =1.8V ) CTL 3 Phase Error (degree) Phase Error (degree) 2.0 PC1-PA1, PC2-PA2 Phase Error vs. Frequency 3 2 1 0 -1 -2 2 1 0 -1 -2 -3 -3 1.0 1.5 2.0 Frequency (GHz) -4- 1.5 Frequency (GHz) PC1-PA1, PC2-PA2 Phase Error vs. Frequency -4 0.5 3.0 Frequency (GHz) Frequency (GHz) 2.5 3.0 -4 0.5 1.0 1.5 2.0 Frequency (GHz) 2.5 3.0 NJG1662MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Switching Time Insertion Loss vs. Input Power ( V =2.7V ) DD ( f=2GHz, PC1-PA1 ON, VCTL=1.8V ) 0.0 1.7 μs PA1 Port Insertion Loss (dB) Voltage (arb. unit) VCTL Port -0.5 -1.0 V =1.5V DD V =2V DD V =2.7V -1.5 DD V =3.5V DD V =4.5V DD -2.0 Time (0.5μ s/div) 10 15 20 25 30 Input Power (dBm) -5- NJG1662MD7 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Insertion Loss vs. Ambient Temperature ( PC1-PA1 ON, V =2.7V, V DD CTL Insertion Loss vs. Frequency =1.8V ) 0.0 0 Insertion Loss (dB) f=1GHz f=2GHz f=2.5GHz -0.2 Insertion Loss (dB) ( PC1-PA1 ON, f=2GHz, VDD=2.7V, VCTL=1.8V ) -0.4 -0.6 -0.8 -0.5 -1 o -45 C o -1.5 +25 C o +90 C -1.0 -50 0 50 -2 0.5 100 1.0 1.5 o DD CTL ( f=2GHz, V =2.7V, V =1.8V ) DD Isolation (dB) 1.6 VSWR CTL =1.8V ) PC1-PB1 PC2-PB2 PC1-PC2 -5 1.8 1.4 1.2 -10 -15 -20 -25 -30 1 -50 0 50 -50 100 ( f=2GHz, V =2.7V, V ( VDD=2.7V, VCTL=1.8V ) DD CTL(H) =1.8V, V =0V ) CTL(L) 6 PC1-PA1,PC2-PA2 PC1-PB1,PC2-PB2 o o Phase Error (degree) +25 C o +90 C 2 0 -2 4 2 0 -2 -4 -4 -6 0.5 100 Phase Error vs. Ambient Temperature -45 C 4 50 Ambient Temperature ( C ) PC1-PA1, PC2-PA2 Phase Error vs. Frequency 6 0 o o Ambient Temperature ( C ) Phase Error (degree) 3.0 0 2 -6 1.0 1.5 2.0 Frequency (GHz) -6- 2.5 Isolation vs. Ambient Temperature VSWR vs. Ambient Temperature ( PC1-PA1 ON, V =2.7V, V 2.0 Frequency (GHz) Ambient Temperature ( C ) 2.5 3.0 -50 0 50 100 o Ambient Temperature ( C ) NJG1662MD7 ! APPLICATION CIRCUIT PC1 PC2 C5 11 VCTL 10 C4 9 8 12 7 VDD C7 0/1.8V PA1 13 6 14 5 C6 2.7V PB2 C3 1 2 3 C1 4 C2 PA2 PB1 ! PARTS LIST Part ID C1~C6 C7 Value 56pF 1000pF Notes MURATA (GRM15) ! TEST PCB LAYOUT (TOP VIEW) PCB: FR-4, t=0.2mm Capacitor Size: 1005 Strip Line Width: 0.4mm PC1 PC2 C5 VCTL C6 Losses of PCB, capacitors and connectors VDD C3 C2 PA1 PB2 PA2 26 x 26mm C4 C7 C1 PCB Size: Frequency (GHz) Loss (dB) 1.0 0.38 2.0 0.51 2.5 0.55 PB1 -7- NJG1662MD7 ■ PACKAGE OUTLINE (EQFN14-D7) Units : mm Board : Cu Terminal treat : SnBi Molding material : Epoxy resin Weight Cautions on using this product This product contains Gallium-Arsenide (GaAs) which is a harmful material. • Do NOT eat or put into mouth. • Do NOT dispose in fire or break up this product. • Do NOT chemically make gas or powder with this product. • To waste this product, please obey the relating law of your country. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages. -8- : 3.3mg [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights.