RS1A thru RS1M SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA Ldeaf for surface mount applications Easy pick and place Buit-in strain relief Fast switching speed Case JEDEC DO-214AC molded plastic Epoxy UL 94V-0 rate flame retardant Metallurgically bonded construction Polarity Color band denotes cathode end Mounting position Any Weight 0.063 grams MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% RS1B RS1D RS1G RS1J RS1K RS1M UNITS 100 200 400 600 800 1000 Volts 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts SYMBOL RS1A Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current .0375 (9.5mm)Lead Length at TA =500C I(AV) 1.0 Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneoue at 1.0A DC VF 1.3 Volts Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage @TA=1000C IR 5.0 100 A Maximum Reverse Recovery Time (NOTE 1) TRR Typical Junction Capacitance (NOTE 2) CJ 15 Operating Temperature Range TJ +175 0 TSTG -65 to +175 0 50 Amps 0 Storage Temperature Range 150 NOTES 1. Rverse Recovery Time Test Condibons: IF=0.5A, I R=1.0A, l RR=0.25A 2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC www.paceleader.tw 1 250 500 nS pF C C RS1A thru RS1M SURFACE MOUNT FAST RECOVERY RECTIFIER RATING AND CHARACTERISTICS CURVES RS1A THRU RS1M 1.6 Fig. 2 - TYPICAL JUNCTION CHARACTERISTICS SINGLE PHASE HALF W AVE 60HZ RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 1.4 1.2 1.0 .8 .6 CAPACITANCE. (pF) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES Fig. 1 - FORWARD CURRENT DERATING CURVE .4 .2 0 20 40 60 80 100 120 140 160 180 0 TJ=25C 10 o LEAD TEMPERATURE, C 1 1 10 100 REVERSE VOLTAGE, Vdc Fig. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Fig. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 10 PEAK FORWARD SURGE CURRENT, AMPERES 25 8.3ms Single Half Since-Wave JEDEC Method 20 0 TJ=25C 1 15 10 Pulse Width=300 S 1% Duty Cycle 5 0.1 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60HZ 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 5 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50 Noninductive (+) 25 Vdc (approx) ( ) trr 10 Noninductive ( ) D.U.T. 1 NONInductive +0.5A PULSE GENERATOR NOTE 2 OSCILLOSCOPE NOTE 1 (+) NOTES:1. Rise Time=7ns max. Input Impedance=1 megohm. 22pF 2. Rise Time=10ns max. Source Impedance=50 Ohms. www.paceleader.tw 0 -0.25 -1.0 SET TIME BASE FOR 10ns/cm 2 1cm