S3AC thru S3MC SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 3.0 AMPERES SMC/DO-214AB .108(2.75) .128(3.25) .220(5.59) .245(6.22) .260(6.60) .280(7.11) .006(.152) .012(.305) .079(2.00) .103(2.62) .002(.051) .008(.203) .030(0.76) .050(1.27) .305(7.75) .320(8.13) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA For surface mount applications Glass passivated junction Low profile package Built-in strain relief Easy pick and place Low forward voltage drop Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 260oC/10 seconds at terminsls Case JEDEC DO-214AB molded plastic Terminals Solder plated, solderable per MIL-STD-750, Method 2026 Polarity Indicated by cathode band Standard Package 12mm tape (EIA STD EIA-481) Weight 0.007 ounce, 0.21gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% S3BC S3DC S3GC S3JC S3KC S3MC UNITS 100 200 400 600 800 1000 Volts 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts SYMBOL S3AC Maximum Repetitive Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current at TL =750C I(AV) 3.0 Amps Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 100 Amps Maximum Instantaneous Forward Voltage at 3.0A VF 1.2 Volts Maximum DC Reverse Current (NOTE 1)TA=25 C at Rated DC Blocking Voltage TA=1250C IR 5 250 A Typical Reverse Recovery Time (NOTE 1) TRR 2.5 nS 50 0 Maximum Thermal Resistance (NOTE 2) Typical Junction Capacitance (NOTE 3) Operating and Storage Temperature Range R R JL 13 47 CJ 53 TJ TSTG -55 to +150 JA NOTES 1. Reverse Recovery Test Conditions IF=0.5A, IR=1.0A, IRR=0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 3. 8.0mm2 (0.13mm thick) land areas. www.paceleader.tw 1 0 C/W pF 0 C S3AC thru S3MC SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES S3AC THRU S3MC Fig. 2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT AMPERES Fig. 1 - FORWARD CURRENT DERATING CURVE 3.0 2.5 2.0 1.5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 1.0 0.5 0 50 60 70 80 90 100 110 120 130 140 150 LEAD TEMPERATURE, 0C 200 100 50 8.3ms Single Half Sine Wave JEDEC Method 10 1 5 10 50 100 NUMBER OF CYCLES AT 60 Hz Fig. 4 - TYPICAL JUNCTION CAPACITANCE Fig. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 CAPACITANCE-pF 30 10 3.0 50 0 TJ=25C 10 1.0 5 1 5 0 TJ=25C Pulse Width-300 s 2% DUTY CYCLE 0.3 10 50 100 REVERSE VOLTAGE(V) 0.1 .03 .01 0.6 Fig. 5 - TYPICAL REVERSE CHARACTERISTICS 0.7 0.8 0.9 1.0 1.1 1.2 1.3 INSTANTANEOUS REVERSE CURRENT, (mA) INSTANTANEOUS FORWARD CURRENT, (A) 100 INSTANTANEOUS FORWARD VOLTAGE, (V) 100 0 TJ=125C 10 1.0 0 TJ=25C 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE www.paceleader.tw 2