SFM101 thru SFM108 SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIERS DO-213AB / MELF SOLDERABLE ENDS CATHODE BAND D1= 0.105(2.67) 0.095(2.41) D2 0.022(0.559) 0.016(0.406) 0.205(5.20) 0.185(4.70) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES MECHANICAL DATA Ldeal for surface mounted applications Easy pick and place Low leakage current Glass passivated chips Fast switching Metallurgically bonded construction High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths Case Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method 208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.12gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temp. unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load SYMBOL SFM 101 SFM 102 SFM 103 SFM 104 SFM 105 SFM 106 SFM 107 SFM 108 UNITS Maximum Current Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 Volts Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 Volts Maximum Average Forward Rectified Current 375 , (9.5mm) lead length at TT=550C I(AV) 1.0 Amps Peak Forward Surge Current ,8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneous Forward Voltage at 1.0A VF 1.0 0 Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage TA=1250C IR Maximum Reverse Recovery Time (Note 1) TRR Typical Junction Capacitance (Note 2) CJ Typical Junction Capacitance R R Storage Temperature Range TSTG TSTG A 1 nS pF 25 60 20 NOTES 1. Reverse Recovery Test Conditions IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C www.paceleader.com.tw Volts 35 50 JA TJ 1.7 5.0 100 JC Operating Temperature Range TJ 1.3 0 C/W -65 to +125 0 -65 to +150 0 C C SFM101 thru SFM108 SURFACE MOUNT GLASS PASSIVATED SUPER FAST SILICON RECTIFIERS RATING AND CHARACTERISTICS CURVES SFM101 THRU SFM108 www.paceleader.com.tw 2