14 Pin DIL 5 Tap Low Profile TTL Compatible MIL 883 Active Delay Lines TAP DELAYS ±5% or ±2 nS TOTAL DELAYS ±5% or ±2 nS PART NUMBER TAP DELAYS ±5% or ±2 nS 5, 10, 15, 20 6, 12, 18, 24 7, 14, 21, 28 8, 16, 24, 32 9, 18, 27, 36 10, 20, 30, 40 12, 24, 36, 48 15, 30, 45, 60 20, 40, 60, 80 25, 50, 75, 100 30, 60, 90, 120 35, 70, 105, 140 25 30 35 40 45 50 60 75 100 125 150 175 EP9590-25 EP9590-30 EP9590-35 EP9590-40 EP9590-45 EP9590-50 EP9590-60 EP9590-75 EP9590-100 EP9590-125 EP9590-150 EP9590-175 40, 80, 120, 160 45, 90, 135, 180 50, 100, 150, 200 60, 120, 180, 240 70, 140, 210, 280 80, 160, 240, 320 84, 168, 252, 336 88, 176, 264, 352 90, 180, 270, 360 94, 188, 282, 376 100, 200, 300, 400 TOTAL DELAYS ±5% or ±2 nS PART NUMBER 200 225 250 300 250 400 420 440 450 470 500 EP9590-200 EP9590-225 EP9590-250 EP9590-300 EP9590-280 EP9590-400 EP9590-420 EP9590-440 EP9590-450 EP9590-470 EP9590-500 Delay Times referenced from input to leading edges at 25°C, 5.0V, with no load. DC Electrical Characteristics Parameter Test Conditions VOH VOL VIK IIH IIL IOS ICCH ICCL TRO NH NL Min Max Unit High-Level Output Voltage Low-Level Output Voltage Input Clamp Voltage High-Level Input Current VCC = min. VIL = max. I OH = max VCC = min. VIH = min. IOL= max VCC = min. II = II K VCC = max. VIN = 2.7V VCC = max. VIN = 5.25V Low-Level Input Current VCC = max. VIN = 0.5V Short Circuit Output Current VCC = max. VOUT = 0. (One output at a time) High-Level Supply Current VCC = max. VIN = OPEN Low-Level Supply Current VCC = max. VIN = 0 Output Rise Time Td ≤ 500 nS (0.75 to 2.4 Volts) Fanout High-Level Output VCC = max. VOH = 2.7V Fanout Low-Level Output VCC = max. VOL = 0.5V Recommended Operating Conditions VCC VIH VIL IIK IOH IOL PW* d* TA Supply Voltage High-Level Input Voltage Low-Level Input Voltage Input Clamp Current High-Level Output Current Low-Level Output Current Pulse Width of Total Delay Duty Cycle Operating Free-Air Temperature VCC EP9590 10/92 0.5 -1.2 50 1.0 -2 -100 V V V µA mA mA mA 14 VCC 12 10 4 6 8 OUTPUT INPUT 1 7 GROUND 75 mA 75 mA 4 nS 20 TTL LOAD 10 TTL LOAD Package Dimensions Max Unit 4.5 2.0 5.5 V V V mA mA mA % % °C 0.8 -18 -1.0 20 40 -55 40 +125 White Dot Pin#1 PCA EP9590-25 Date Code Unit 3.2 110 2.0 1.0 100 5.0 Volts % nS MHz KHz Volts .400 Max. .800 Max. .200 Max. .015 .018 x .010 Input Pulse Test Conditions @ 25° C Pulse Input Voltage Pulse Width % of Total Delay Pulse Rise Time (0.75 - 2.4 Volts) Pulse Repetition Rate @ Td ≤ 200 nS Pulse Repetition Rate @ Td > 200 nS Supply Voltage -40 Min *These two values are inter-dependent. EIN PW TRI PRR 2.7 Schematic .150 Typ. .300 .100 ELECTRONICS INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 TEL: (818) 892-0761 FAX: (818) 894-5791