10Base-T Interface Module ELECTRONICS INC. EPE6370G • General purpose 10Base-T Filter Module • Complies with or exceeds IEEE 802.3, 10Base-T Standards • Available in SMD and DIP Packages Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -7/--- -15/-16 -20/-10 -30/-18 -30/-30 Attenuation (dB Min.) Crosstalk (dB Min.) • Isolation : 1500VAC • Cable Side Impedance : 100 Ω • •* Referenced to the filter output @ 5 MHz for filter only, excluding resistor network Schematic Transmit Channel Chip Side Cable Side 1 • Receive Channel Chip Side 8 Cable Side 16 200Ω 9 50Ω 2 7 LPF 15 200Ω LPF 10 50Ω 3 6 14 11 2:1 1:1 Package .980 (24.89) Pin 1 I.D. .092 (2.34) .100 (2.54) .140 (3.56) PCA EPE6370G Date Code .390 (9.90) .560 (14.22) .030 (.762) .700 (17.78) .375 (59.53) Pad Layout .010/.015 (.254/.381) .008/.012 (.203/.305) 0°-8° .035 (.889) .016/.022 (.406/.559) .510 (12.95) .100 (2.54) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6370G Rev. 1 5/6/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com