10Base-T Interface Module ELECTRONICS INC. EPE6386G • Designed for SitePlayer • 1500 Vrms Isolation • Available in SMD and DIP Packages • Complies with or exceeds IEEE 802.3, 10Base-T Requirements Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) Typ. Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz @ 200 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -17/-17 -7/-5 -15/-11 -30/-25 -35/-30 -30/-30 -30/-30 -20/-20 -30/-30 Attenuation (dB Min.) Common Mode Rejection (dB Min.) Crosstalk (dB Min.) • Cable Side Impedance : 100 Ω • Schematic Transmit Channel Receive Channel 1 Chip Side 16 LPF 6 Cable Side 3 14 2 15 11 Chip Side LPF 7 8 Cable Side 9 10 Package .100 (2.54) .990 (25.15) .145 (3.68) Pin 1 I.D. .030 (.762) PCA EPE6386G Date Code .270 (6.86) .440 (11.18) .700 (17.78) .008/.012 (.203/.305) 0°-8° .100 (2.54) .017/.023 (.432/.584) .055 (1.40) .300 (7.62) .005/.015 (.127/.381) .265 (6.73) Pad Layout .040 (1.02) .400 (10.16) .300 (7.62) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6386G Rev. 1 1/28/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com