~ Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier ~ + Reverse Voltage 200 and 1000V Forward Current 1.0A LB2S thru LB10S - Features ◆ Low Profile: Typical height of 1.4mm ◆ Ideal for automated placement ◆ High surge current capability ◆ Solder Dip 260℃,40seconds Mechanical Data ◆ Case:SOPA-4 Epoxy meets UL-94V-0 Flammability rating ◆ Terminals:Matte tin plated ldads, solderable per J-STD-002B and JESD22-B102D ◆ Polarity:As markde on body Maximum Ratings & Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Parameter Symbol LB2S LB4S LB6S LB8S LB10S Unit Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 V Maximum RMS voltage VRMS 140 280 420 560 800 V Maximum DC blocking voltage VDC 200 400 600 800 1000 V Maximum Average forward output rectified current on glass-eposy P.C.B IF(AV) A 0.8 on aluminum substrate Peak forward surge current 8.3 ms single sine-wave 1.0 IFSM 30 A It 2 3 A sec VF 0.95 V superimposed on rated load (JEDEC Method) Rating for fusig (t<8.3ms) Maximum instantaneous forward voltage drop 2 per diode at 0.4A Maximum DC reverse current at TA=25℃ rated DC blocking voltage per leg TA=125℃ Typical thermal resistance per leg (Note 1) Operating junction temperature range Storage temperature range IR 5 µA 500 RθJA 80 RθJL 25 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Notes: 1. Device mounted P.C.B with 0.47x0.47''(12mmx12mm) Copper Pads. 2. JEDEC registered values Web Site: WWW.PS-PFS.COM ℃/W ~ Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier ~ + LB2S thru LB10S Reverse Voltage 200 and 1000V Forward Current 1.0A RATINGS AND CHARACTERISTIC CURVES (TA=25℃ unless ontherwise noted) Web Site: WWW.PS-PFS.COM