GBL005 thru GBL10 Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 4.0 Amperes Features Ideal for printed circuit boards High surge current capability Typical IR less than 0.1µA High case dielectric strength Solder Dip 260 °C, 40 seconds Mechanical Data Case: GBL Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked on body Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Monitor, TV, Printer, SMPS, Adapter, Audio equipment, and Home Appliances application Package outline dimensions in inches (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Parameter Symbols GBL005 GBL01 GBL02 GBL04 GBL06 GBL08 GBL10 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified output current at TC=50oC TA=40oC Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 2.0A Maximum DC reverse current at rated DC blocking voltage per leg TA=25oC TA=150oC Typical junction capacitance per leg at 4.0V, 1MHz Typical thermal resistance per leg Operating junction and storage temperature range Notes: IF(AV) 4.0 (1) 3.0 (2) IFSM 150.0 Amps I2t 93 A 2 se c VF 1.0 Volts IR 10.0 500 uA 95 CJ 40 RθJA RθJL 22 (2) 3.5 (1) TJ, TSTG -55 to +150 1. Unit mounted on 3.0 x 3.0 x 0.11” thick (7.5 x 7.5 x 0.3 cm) Al. plate 2. Unit mounted on P.C.B. at 0.375” (9.5 mm) lead length and 0.5 x 0.5" (13 x13 mm) copper pads 436 Amps pF o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 437